Food Chain Magnate - Deluxe Edition

I wasn't happy with the insert it came with it, so I did one myself. This is a big print, the biggest two pieces: Main storage and Cards are split in 2, so you will need to glue it together.
You need 2 copies of: FCM - Money x2.stl and FCM - City Tiles x2.stl, 1 copy for every other one.

Also: It can storage sleeved cards (I used Sleeve Kings for the 56x87mm and some leftovers Gamegenic sleeves I found around for the small ones, also for mere coincidence the Gamegenic ones are the right size for de milestone boards).

For the Card Tray, the big one, there is a FCM - Cards Reinforce file. As the weight of the 300+ cards with sleeves is way too much for one junction, just print the two part file, glue it together and the glue the reinforcement under it, If the reinforce is to big for your printer, just print it as big as you can and then glue it under the two pieces.

If you have a really big printer, you can use One Piece - FCM - Cards.stl and One Piece - FCM - Main.stl instead of FCM - Cards Big Left.stl, FCM - Cards Big Right.stl, FCM - Main Left.stl and FCM - Main Right.stl. For the cards tray: print the one piece card tray and add or glue the reinforce file... this just to no lose the box fit.

Also, the paper money was replaced with poker chips. Personally I bought two copies of: https://www.amazon.com/dp/B0DB67XHGH?ref=ppx_yo2ov_dt_b_fed_asin_title
And did this distribution (split 50% - 50% between the two copies of the Money Tray)

• 1s: 40
• 5s: 40
• 25s: 20
• 50s: 10
• 100s: 10

V1.1: Some changes in the FCM_-_City_Tiles_x2, now it should fit better.