Crib (Cribbage) Pegs

for Cribbage (1630) Layer by Layer

Boards & Maps Free

Plan Your Print

✓ Optional multicolor profile The designer also offers a multicolor way to print this (an MMU/AMS profile or per-color parts)

About 5 g of filament From the designer's print profile

Print Profile (4) Set of 3s 47m 6 g PLA

Set of 3s

1 plate 47m 6 g PLA

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1 · Set of 3s

47m 6 g PLA · 2 g PLA · 2 g PLA · 2 g

Set of 2s

1 plate 47m 5 g PLA

A1, P1S, P1P, X1 Carbon, X1E, X1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1 · Set of 2s

47m 5 g PLA · 2 g PLA · 2 g PLA · 1 g

Singles

1 plate 23m 2 g PLA

A1, P1S, P1P, X1 Carbon, X1E, X1, A1 mini, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1 · Singles

23m 2 g PLA · 2 g

No Brim - SuperTack Plate

1 plate 39m 5 g PLA

These settings did NOT adhere on my PEI plate. But they DO work with my SuperTack plate. Added skirt to prime the hotend.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1 · Set of 2s

39m 5 g PLA · 2 g PLA · 2 g PLA · 1 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

Created some crib pegs to go along with my crib board model:

I have a few print profiles:

Set of 2 (the number that will work with the travel crib board and fit in the storage area). Using AMS to do all 3 colors in one print job, set to print by object (2 pegs = 1 object). Normally I might be concerned about the blob at the beginning but since there is a brim, the blob simply forms on the beginning of the brim which is discarded.
Set of 3 (again with AMS; 3 pegs = 1 object) for those who may want 3 of each color for another board or use.
Individuals…just 3 pegs all the same on the plate, you can make more or print less however you wish, this may be easier for those without AMS.

crib cribbage pegs