Flash Point - Fire Rescue

This is an insert for Flash Point - Fire Rescue

It holds:
The base game
Extreme Danger Expansion
2nd Story Expansion
Honor & Duty Expansion
Dangerous Waters Expansion
Urban Structures Expansion
Tragic Events Expansion
Veteran and Recuse Dog Expansion

All cards can be sleeved. All cards have been provided with Gamegenic Matte Premium Sleeves and this is how it was designed and tested.

The insert is designed so that the trays can be taken out of the box and placed on the table for play. This optimizes assembly and disassembly.

All game board parts are placed in the Extreme Danger Box - this creates a lid lift. The insert and the instructions are then placed in the base game box without a lid lift.

The generic miniatures from the basic game have been removed and are not stored in the insert, as they have been replaced by the expansions and new miniatures.

The longest part to print measures 211.5 mm. You should be able to print this on standard printers, or you can rotate the part by 45 degrees in the slicer.

The whole thing was printed on a BambuLab P1S. Printing takes approx. 10 hours with a material consumption of approx. 425 grams - depending on how the infill is set or whether you print with top and bottom layers.