Log in to join the conversation.
Lovci relikvií (Relic hunters) - insert
Hello,
This is my insert for the deck-building game Relic Hunters. The insert itself, which the game has in the Czech localization, is fine, but I wanted to use the free space for alternative figures, because the ones that come with the game seem uninteresting and boring to me. When creating the insert, I was inspired by the original insert, but mine is made up of six boxes with the following division:
1st box – It is designed for hexes with three dots and one dot (except for hexes with relics).
2nd box – It is designed for cards.
3rd box – It is designed for hexes with one dot and also hexes of relics, volcanoes and base camp.
4th box – It is designed for coins.
5th box – It is designed for figurines.
6th box – It is intended for relics in stands.
Among the models for download is also a card separator to make them easier to sort. I recommend placing one separator at the bottom of the card box to make it easier to take them out. Printing the separators is not necessary.
The insert is designed for wrapped cards.
For printing, I used the 0.28mm Superdraft Speed setting for faster printing.
Packaging used : TLAMA games Diamond Orange: Chimera Standard (57.5 × 89 mm)
SUPPORTS: No
_________
Hi,
this is my insert for the deck-building game Relic Hunters. The insert itself, which the game has in the Czech localization, is fine, but I wanted to use the free space for alternative figures, because the ones that come with the game seem uninteresting and boring to me. When creating the insert, I was inspired by the original insert, however, this one of mine consists of six boxes with the following purpouse:
1st box - It is intended for hexes with three dots and one dot (except for hexes with relics).
2nd box - It is intended for cards.
3rd box - It is intended for hexes with one dot and also hexes of relics, volcanoes and base camp.
4th box - It is intended for coins.
5th box - It is intended for figures.
6th box - It is intended for relics in stands.
The downloadable files also include a card divider (separator) to help you sort your cards better. I recommend placing one divider at the bottom of the card box to make it easier to remove them. Printing the dividers is not necessary.
The insert is intended for sleeved cards.
For printing, I used the 0.28mm Superdraft Speed setting for faster printing.
Sleeves used: TLAMA games Diamond Orange: Chimera Standard (57.5 × 89 mm)
SUPPORTS: No
Translated from Czech - show original
Ahoj,
toto je můj insert pro deck-buildingovou hru Lovci relikvií (Relic hunters). Samotný insert, který hra v české lokalizaci má je v pořádku, ale chtěl jsem využít volné místo na alternativní figurky, protože ty, které jsou dodávány společně s hrou mi přijdou nezajímavé a nudné. Při tvorbě insertu jsem se inspiroval původním insertem, nicméně tento můj je tvořen šesti krabičkami s následujícím rozdělením:
1. krabička – Je určena na hexy se třemi tečkami a jednou tečkou (mimo hexů s relikviemi).
2. krabička – Je určena na karty.
3. krabička – Je určena na hexy s jednou tečkou a dále hexy relikvií, vulkánů a základního tábora.
4. krabička – Je určena na mince.
5. krabička – Je určena na figurky.
6. krabička – Je určena na relikvie ve stojáncích.
Mezi modely ke stažení je i oddělovač karet, aby se lépe třídily. Doporučuji jeden oddělovač umístit i na dno krabičky pro karty, aby se lépe vyndavaly. Tisk oddělovačů není nezbytný.
Insert je určen pro obalené karty.
Pro tisk jsem použil nastavení 0,28mm Superdraft Speed pro rychlejší vytistění.
Použité obaly : TLAMA games Diamond Orange: Chimera Standard (57,5 × 89 mm)
PODPĚRY: Ne
_________
Hi,
this is my insert for the deck-building game Relic Hunters. The insert itself, which the game has in the Czech localization, is fine, but I wanted to use the free space for alternative figures, because the ones that come with the game seem uninteresting and boring to me. When creating the insert, I was inspired by the original insert, however, this one of mine consists of six boxes with the following purpouse:
1st box - It is intended for hexes with three dots and one dot (except for hexes with relics).
2nd box - It is intended for cards.
3rd box - It is intended for hexes with one dot and also hexes of relics, volcanoes and base camp.
4th box - It is intended for coins.
5th box - It is intended for figures.
6th box - It is intended for relics in stands.
The downloadable files also include a card divider (separator) to help you sort your cards better. I recommend placing one divider at the bottom of the card box to make it easier to remove them. Printing the dividers is not necessary.
The insert is intended for sleeved cards.
For printing, I used the 0.28mm Superdraft Speed setting for faster printing.
Sleeves used: TLAMA games Diamond Orange: Chimera Standard (57.5 × 89 mm)
SUPPORTS: No
