Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Dice Tray
Dice Towers & Trays
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 359 g of filament
From the designer's print profile
Print Profile (2) 0.08mm layer, 3 walls, 15% infill 10h 35m 359 g PLA
0.08mm layer, 3 walls, 15% infill
1 plate
10h 35m
359 g PLA
X1 Carbon, P1S, P1P, X1, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
My settings using Bambu Slicer were:
.08 Extra Fine Setting.
3 wall loops
Sparse infill Pattern set to: Archimedean Chords
Speed for initial layer was set to 40mm/s
Speed for Initial Layer infill was set to 90mm/s
No Supports
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
10h 35m
359 g
PLA · 359 g
A1 mini - 0.2mm layer, 3 walls, 15% infill
1 plate
2h 40m
100 g PLA
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
smaller remix to fit the A1 mini and under my dicecam setup.
Check the dimensions to see if this is the right size for you!
• ~10cm wide / ~15cm long / ~4,5cm high
• rolling tray: ~10cm square, 4cm deep
• ~100g of filament
• ~2hrs to print with 0.20mm standard profile
• Tested with elegoo PLA matte and custom filament settings based on elegoo's recommendations (not included in this profile)
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
2h 40m
100 g
PLA · 100 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
A simple Dice Tray, this has a 10in x 6in roll space with an added dice holder location on the side. It has a rounded inner edge for easier grabbing of dice.