Gaslands Light-Up Billboard Remix

This is a remix of the excellent Gaslands Billboards by Sablebadger. This remix adds a battery base, wiring cover, and added some holes in the billboard itself to accept small (2mm) LED lights. The LED lights are wired in parallel to a single battery pack in the base. The small switch piece has a hole that should be slightly hollowed out with an X-acto and friction fit onto the switch prior to inserting the battery cover, which holds the battery pack in place. Once you print the parts, I suspect the assembly will be self explanatory.

LED's used: https://www.amazon.com/25pcs-Pre-soldered-Micro-Wired-Muti-Resistor/dp/B07P8PMCCS/ref=sr_1_16?crid=3FN0AU3BQXBA8&dib=eyJ2IjoiMSJ9.BsAPSAN0R-bCTcGujiNPMnKBMkaxrJj82awUdaRqRZpOWufMx8k_G3pKDtoTy8eUxKYbWBAYSn-jKEq-GETz0dDo9oygzAtf1vQ2_9Sct24aj2ycObiNFCUkPeo4qDrzi6_S5pgyBYabo0T6GbtEjJstYmsFOUNSGiqmRgjL-hriYDyU-lgYFQEbOEAx3P-0g3aLrhtjuBPgqNj39rOKvEB7Cv5cKMvbcDrFjTYxOjO5eohHvYQBd356srXZlUwRqpQ-cpMYWZZUwJOrkyQs-bu2j8xYtiBjiOJNnIplq-M.ggzWkZ8DvLNmIMmSG-1_EN1am8Wtk5Bq3gBEwb_ihZI&dib_tag=se&keywords=LED%2Bwired&qid=1746285798&sprefix=led%2Bwire%2Caps%2C153&sr=8-16&th=1

Battery pack used: https://www.amazon.com/Bolsen-Tech-Lilypad-Battery-Arduino/dp/B07MDRBT6N/ref=sr_1_7_sspa?crid=19IIVU9DQYANP&dib=eyJ2IjoiMSJ9.VOGDK4MHZIXNk-HZ8YCsL-VpeLcY83bco3liVQJRNHTRQTP7tcvIIb3KshVz9zIfd8I9wUHTglRry2wLbYPiKHDi183Rw8W0Xq-3j04kmcpfGHLdqqQu8JgJy-e08Yk0E3UhsxN1M3pmMd_XaGToMOc-MJNQ4iZcIl8ZUR3W4-zsZwfQDEg7qOmGAHj1M5Q32OmAAqiiSBE2IgnQOoW3ADBpXrTSoo2lQ7Fjw8M3qEg.VBmC1uzjw4u7B4PkNeSdT3VBFZgpmzJdZtfK3mOYwM4&dib_tag=se&keywords=cr2032+battery+holder+with+leads&qid=1746285875&sprefix=CR2032+battery+%2Caps%2C164&sr=8-7-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9tdGY&psc=1

Thank you Sabelbadger for the excellent works. His tabletop gaming on Patreon is located here: https://www.patreon.com/sablebadger

Please support him.

This models is remix licensed Non-Commercial and based upon his original work, so please do not sell unless you have a vendor license from Sabelbadger.