Fugitive (2nd Edition) Deck Divider

CONTEXT: The 2nd edition printing of Fugitive by Fowers Games comes in a very small and tightly packed box. If you purchased the "Event Cards" expansion, you can't fit the expansion AND the base game content all in box.

If you remove the deck divider (a thick piece of cardboard which separates the decks and shows the players the range of hideout numbers each deck contains), there will be just enough room to fit the Events expansion cards.

I've created this replacement 3D printable Deck Divider which fits above or below the cards in the box leaving room for the expansion cards.

USAGE: Use this print during gameplay as a visual reference for arranging the three draw piles according to the card values and iconography from each deck. When you're done playing, you can fit this print into the game's box .

You can choose to either place this print on top of the cards for easy access OR on bottom which raises the cards up giving you twice as much grip space for pulling the slippery PVC cards out of the box! (See the two images to compare how much more grip room you have with the top vs bottom layout).

Also, make sure to align it so that the cavity on the underside of the print lines up with with the side your dry erase markers are on).

PRINTING:

• 1.75mm PLA filament
• 20mm layer height
• If your printer is bad at bridging, you might want to add supports for the marker cavity at the bottom of the print.
• Turn on Ironing for “All top surfaces” to achieve a nicer finish
• If you have two different colors of filament, I suggest creating a color split at the layer where the extruded details begin to appear (the topmost 0.8mm). This will add contrast and make the numbers/iconography easier to read.