Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Hexagon Dice Vault
Dice Towers & Trays
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 101 g of filament
From the designer's print profile
Print Profile 2h 31m 101 g PLA
What it takes
1 plate
2h 31m
101 g PLA
P1S, H2D, X1 Carbon, X1, P1P, A1, X1E, H2D Pro, H2S, P2S, H2C, X2D, A2L
Print profile
• Nozzle size: 0.4 mm
• Layer height: 0.2 mm
• Filament: PLA
• Print speed: default machine preset
• Infill: 20 % cubic
• Walls: 3 perimeters
• Top layers: 5
• Bottom layers: 5
• Support: off
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
2h 31m
101 g
PLA · 101 g
Designer's Description
Need a neat home for your favorite math rocks?
This hex-shaped vault carries one full polyhedral set and up to five bonus dice.
Flip the lid and you get a tidy rolling tray that fits right at the table.
Six 8 × 3 mm magnets click the halves together and stop spills in your bag.
Prefer to travel light?
Grab the small vault.
It drops the extra space yet shields up to ten dice in one layer.
Carry only the essentials, roll in the lid and keep space free for other essentials.
Printer setup
- Layer height: 0.2 mm
- Walls: 3 perimeters
- Infill: 20 % cubic for best support of surfaces
- Material: your choice, although PLA should be more than enough
Orientation
- Place each part flat on the bed.
- Keep the engraved face down for clean lines.
Magnets
- Size: 8 mm × 3 mm
- Glue after the print using small amount of hotglue or superglue
- Check polarity before you seat the last one.
Post-processing
- Cut 4-5 mm craft foam for the bottom.
- Add a 1 mm felt disc in the lid for quieter rolls.
- Super-glue or spray-adhesive both layers.