Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Dice tray with holder for full dice set
Dice Towers & Trays
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 126 g of filament
From the designer's print profile
Print Profile 2h 41m 126 g PLA
What it takes
1 plate
2h 41m
126 g PLA
A1, P1S, P1P, X1 Carbon, X1E, X1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
I've used Bambulab's dark gray filament:
https://eu.store.bambulab.com/en-nl/collections/pla/products/pla-basic-filament?variant=49299261423964
I suggest adding a brim to your print, to keep the corners nice and flat. You will need to trim that afterwards.
The print is about 2,5 hours, so not too bad.
I designed the walls to be 3,2mm thick, so you have two outer and one inner wall, and no infill needed. This is still structurally sound and makes the print much lighter.
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
2h 41m
126 g
PLA · 126 g
Designer's Description
A remix of Froggigi's Dice Tray. Added a tray to throw the dice in! The walls are 3.2mm thick, so there is no unnecessary infill. This makes the dice tray light, and still strong.
In the images you will see that i've added some padding for heavier dice. I had some leftover doormat, that I wanted to use for this. I would not recommend this. Instead use some felt cushioning. I think that might feel much nicer. I will reprint it myself someday as well, if I find some left-over felt or fabric.
I will be filling in the signage for the dice with white paint for clearer readability.
Boost Me I design stuff for DnD, and if you boost me it helps me buy more filament to prototype with.
