Trolle mögen Prinzessinnen Trolls & Princesses

An Insert for Trolls & Princesses Big Nose Edition ("Riesennasen-Ausgabe"). :)

I don't know if this might work with the Standard edition, too (I don't know the sizes there). Please be aware that the insert is designed for sleeved cards but not for vertikal storage. If you want that you have to add some kind of spacer (I used 6 of the original punchboards below; otherwise some foamcore or simple prints should do the trick).

There are two different version for the King's Tiles:

a) 64mm height for perfect height of the tiles. In this case you should also print the 64mm Spacer file
b) 70mm height (a bit to high for the tiles, but no spacer needed)

UPDATE 14/02/26: I have added a spacer tile which has to be printed 4 times and should go first into the box to lay below the insert (it's not tested!).

No commercial use.