Heat Expansion Insert - holds two tracks

for Heat: Pedal to the Metal (2022) Lift the Lid

MrDulkes

Inserts Free

View on MakerWorld 2 16 Added Jun 9, 25 | Updated Oct 3, 26 Support MrDulkes by Liking and Boosting their model.

Plan Your Print

✓ Covers Heat: Tunnel Vision, Heat: Heavy Rain

About 87 g of filament

Print Profile (2) 0.2mm nozzle, 0.12mm layer, 3 walls, 7% infill 11h 14m 87 g PLA

0.2mm nozzle, 0.12mm layer, 3 walls, 7% infill

1 plate 11h 14m 87 g PLA

P1S, X1E, A2L, A1, X1, X1 Carbon, H2D, P1P, H2D Pro, P2S, H2C, H2S, X2D

Plate Details (1)

0.2 mm nozzle, all plates

Plate 1

11h 14m 87 g PLA · 87 g

0.2mm layer, 2 walls, 15% infill

2 plates 3h 59m 153 g PLA

A1, A2L, X2D

Defaulted most settings. Changed to 0.4 Nozzle. Adaptive Layer Height helped smooth curves. Additional 1 plate added.

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1 · 4 on Plate

3h 4m 122 g PLA · 122 g

Plate 2 · 1 on Plate

54m 31 g PLA · 31 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

This insert allows you to store two tracks in a single Heat, Pedal to the Metal expansion box, either Heavy Rain or Tunnel Vision, or a future expansion with the same box size. The four pieces of this insert can be printed all four on a single build plate. I had a 0.2mm nozzle installed when printing this, but it should just as easily print with a 0.4 or larger nozzle.

You can keep the weight low by reducing infill, 7% Gyroid seems to work just fine.

If you download the stl, be aware that you will have to print it four times!

I have printed this model myself (twice, I had to adjust a few measurements after the first print), and it fits perfectly in the box, and the tracks fit in the insert just fine too, without too much wiggle room.

expansion heavy rain tunnel vision heat pedal to the metal days of wonder track