TIKAL Legend Board Game Inserts

The 2026 Tikal Legend board game's stock insert doesn't have a place for some of the tokens and cards. The volcano and small card inserts are also poorly designed. I made inserts to work with the original. The order/orientation of the main board/other boards have to be rotated to fit as the volcano insert is now taller. The abacus AP counter also needs to be relocated to the top of the box to fit. See photos - Layer 1 is near the bottom/Layer 5 on top. Happy printing (and gaming) !

BGG Link for this game: https://boardgamegeek.com/boardgame/426869/tikal-legend

All files should be printed in quantities per their filenames. See notes for each below.

TIKAL_Legend_AP_and_Other_Tokens_1x: I decreased the pocket for the circle Round Counter marker (since printing) so this has a tighter fit
TIKAL_Legend_Large_Solo_Cards_Tray_1x: is designed for sleeved cards. I removed 2mm from the length of this part (since printing) for a looser fit in the box
TIKAL_Legend_Small_Action_Cards_2x: is designed for sleeved cards (each go in the pockets of original insert)
TIKAL_Legend_Volcano_Holder_1x: no supports needed (print with the slotted side on the build plate). The bases of the volcanoes are asymmetric - rotate them 90 degrees if the fit isn't quite right when sliding in; 2 go on the bottom/4 go in the slots.

Specs:
Printer Used: Flashforge Adventurer 5M Pro
Filament Used: Overture Purple PLA
Layer Height: 0.20mm
Infill: 15% - Aligned Rectilinear
Nozzle Temp: 210C first layer, 205C other layers
Bed Temp: 60C first layer, 55C other layers