Pandemic Board Game Organizer

Sign in to track this print from Want to Printed.

About 319 g of filament From the designer's print profile

Print Profile (6) 0.2mm layer, 3 walls, 15% infill (light version) 9h 23m 319 g PLA

0.2mm layer, 3 walls, 15% infill (light version)

3 plates 9h 23m 319 g PLA

X1, P1S, P1P, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Model with lighter card holders. Save some plastic :) No support needed. The only thing you need to know - you should trim some strings after cubes and token boxes are printed (see attached screenshot). Settings: • Layer height 0.2mm • Modified line wight (0.4mm) • Infill - 15% • Arachne walls (to remove walls bulge) • Walls order - outer/inner • Wall loops - 3 • Reduced speed for initial layer (for better adhesion) • Reduced speed for walls (you can revert it if you want) • Printed in two colors

Plate Details (3)

0.4 mm nozzle, all plates

Plate 1

6h 26m 219 g PLA · 219 g

Plate 2

1h 31m 43 g PLA · 43 g

Plate 3

1h 26m 57 g PLA · 55 g PLA · 2 g

0.2mm layer, 3 walls, 15% infill

3 plates 10h 3m 358 g PLA

X1, P1S, P1P, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

No support needed. The only thing you need to know - you should trim some strings after cubes and token boxes are printed (see attached screenshot). Settings: • Layer height 0.2mm • Modified line wight (0.4mm) • Infill - 15% • Arachne walls (to remove walls bulge) • Walls order - outer/inner • Wall loops - 3 • Reduced speed for initial layer (for better adhesion) • Reduced speed for walls (you can revert it if you want) • Printed in two colors

Plate Details (3)

0.4 mm nozzle, all plates

Plate 1

6h 51m 242 g PLA · 242 g

Plate 2

1h 47m 59 g PLA · 59 g

Plate 3

1h 26m 57 g PLA · 55 g PLA · 2 g

0.2mm layer, 3 walls, 15% infill (Single color model)

2 plates 8h 40m 356 g PLA

X1, P1S, P1P, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

No support needed. The only thing you need to know - you should trim some strings after cubes and token boxes are printed (see attached screenshot). Settings: • Layer height 0.2mm • Modified line wight (0.4mm) • Infill - 15% • Arachne walls (to remove walls bulge) • Walls order - outer/inner • Wall loops - 3 • Reduced speed for initial layer (for better adhesion) • Reduced speed for walls (you can revert it if you want) • Printed in single color

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1

5h 50m 242 g PLA · 242 g

Plate 2

2h 50m 114 g PLA · 114 g

0.2mm layer, 3 walls, 15% infill (NFC tag in lid)

3 plates 10h 5m 359 g PLA

X1, P1S, P1P, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Print this profile if you want to insert NFC tag in decease cubes lid. You might use it to allow your player scan it to open game rules on their phones. No support needed. The only thing you need to know - you should trim some strings after cubes and token boxes are printed (see attached screenshot). Settings: • Layer height 0.2mm • Modified line wight (0.4mm) • Infill - 15% • Arachne walls (to remove walls bulge) • Walls order - outer/inner • Wall loops - 3 • Reduced speed for initial layer (for better adhesion) • Reduced speed for walls (you can revert it if you want) • Printed in two colors

Plate Details (3)

0.4 mm nozzle, all plates

Plate 1

6h 51m 242 g PLA · 242 g

Plate 2

1h 47m 59 g PLA · 59 g

Plate 3

1h 27m 58 g PLA · 56 g PLA · 2 g

0.2mm layer, 3 walls, 15% infill (NFC tag, single color)

2 plates 9h 56m 356 g PLA

X1, P1S, P1P, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Print this profile if you want to insert NFC tag in decease cubes lid. You might use it to allow your player scan it to open game rules on their phones. No support needed. The only thing you need to know - you should trim some strings after cubes and token boxes are printed (see attached screenshot). Settings: • Layer height 0.2mm • Modified line wight (0.4mm) • Infill - 15% • Arachne walls (to remove walls bulge) • Walls order - outer/inner • Wall loops - 3 • Reduced speed for initial layer (for better adhesion) • Reduced speed for walls (you can revert it if you want) • Printed in single color

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1

6h 51m 242 g PLA · 242 g

Plate 2

3h 5m 114 g PLA · 114 g

0.2mm layer, 3 walls, 15% infill (light version, single clr)

2 plates 8h 2m 317 g PLA

X1, P1S, P1P, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Model with lighter card holders. Save some plastic :) No support needed. The only thing you need to know - you should trim some strings after cubes and token boxes are printed (see attached screenshot). Settings: • Layer height 0.2mm • Modified line wight (0.4mm) • Infill - 15% • Arachne walls (to remove walls bulge) • Walls order - outer/inner • Wall loops - 3 • Reduced speed for initial layer (for better adhesion) • Reduced speed for walls (you can revert it if you want) • Printed in single color

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1

5h 28m 219 g PLA · 219 g

Plate 2

2h 35m 98 g PLA · 98 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Pandemic Board Game Organizer

Matching filament

Keyboard shortcuts