Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Agricola Insert (revised 2016 edition)

Inserts Free
Plan Your Print
About 542 g of filament From the designer's print profile
Print Profile 20h 22m 542 g PETG
What it takes
6 plates 20h 22m 542 g PETG
P2S, H2S, H2D Pro, H2C, A1, H2D, X2D, A2L
• Use PETG. (PLA will likely work for the boxes, but the lids will need the flexibility of PETG.) • Layer height is .2mm. Other layer heights may throw off the fit of the lids. • From my Bambu Lab P2S experience, you may need to up the bed temp for PETG to 80 degrees for bed adhesion, especially near the edges of the bed where the temps appear to be cooler. • Add whatever text you want to the lids with Bambu Studio: select the bottom of the lid and use the text feature (see photos for text settings). • A1 Mini users: the bits box is too large but can be substituted with a 10+ compartment bead organizer commonly found at craft stores.
Plate Details (6)
0.4 mm nozzle, all plates
Plate 1
8h 6m 204 g PETG · 204 g
Plate 2
1h 12m 42 g PETG · 42 g
Plate 3
4h 98 g PETG · 98 g
Plate 4
1h 56m 48 g PETG · 48 g
Plate 5
3h 48m 108 g PETG · 108 g
Plate 6
1h 20m 42 g PETG · 42 g
Designer's Description

Agricola (revised 2016 edition) Insert

Features

  • Room for one 120 card expansion (no sleeves).
  • All lids can be stored under the containers while in use.
  • Designed for quick game set up and take down.
  • Designed for both storage and in-game use.

Printing

  • Use PETG. (PLA will likely work for the boxes, but the lids will need the flexibility of PETG.)
  • Layer height is .2mm. Other layer heights may throw off the fit of the lids.
  • No supports.
  • Add whatever text you want to the lids with Bambu Studio: select the bottom of the lid and use the text feature (see photos for text settings).
  • A1 Mini users: the bits box is too large but can be substituted with a 10+ compartment bead organizer commonly found at craft stores.
agricola