LayerUp Stats 9

Add Jul 14, 26 Sync Sep 5, 26

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Paint Rack for Dropper Bottles - Skadis Full Rows

Organizers Free

View on MakerWorld 941 1,676 Added Aug 1, 25 | Updated Sep 5, 26 Support Pakulia by Liking and Boosting their model.

Plan Your Print

About 89 g of filament From the designer's print profile

Print Profile (9) Skadis Large Full Row 2h 35m 89 g PLA

Skadis Large Full Row

1 plate 2h 35m 89 g PLA

A1 mini, H2D, H2S, X1E, X1, P1S, P2S, A1, P1P, X1 Carbon, H2D Pro, H2C, X2D, A2L

• All required parts for 1 full row on Skadis Large - 76 x 56 cm / 30 x 22" • Also Suitable for A1 Mini

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1 · 76x56 - Full Row

2h 35m 89 g PLA · 89 g

Single Row of 6

1 plate 39m 19 g PLA

A1 mini, H2D, P1P, H2S, H2D Pro, X1, X1 Carbon, P1S, X1E, A1, P2S, H2C, X2D, A2L

• Ready to slice & print • No supports • Fits A1 Mini

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1 · Row of 6

39m 19 g PLA · 19 g

Skadis Medium Full Row

1 plate 1h 54m 64 g PLA

A1 mini, P1S, X1, P2S, P1P, H2D, H2D Pro, H2S, A1, X1E, X1 Carbon, H2C, X2D, A2L

• All required parts for 1 full row on Skadis Medium - 56 x 56 cm / 22 x 22" • Also Suitable for A1 Mini

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1 · 56x56 - Full Row

1h 54m 64 g PLA · 64 g

Skadis Small Full Row

1 plate 1h 20m 43 g PLA

A1 mini, P1S, X1, P2S, P1P, H2D, H2D Pro, H2S, A1, X1E, X1 Carbon, H2C, X2D, A2L

• All required parts for 1 full row on Skadis Small (Vertical) - 36 x 56 cm / 14¼ x 22" • Also Suitable for A1 Mini

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1 · 36x56 - Full Row

1h 20m 43 g PLA · 43 g

Single Row of 4

1 plate 31m 14 g PLA

A1 mini, H2D, P1P, H2S, H2D Pro, X1, X1 Carbon, P1S, X1E, A1, P2S, H2C, X2D, A2L

• Ready to slice & print • No supports • Fits A1 Mini

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1 · Row of 4

31m 14 g PLA · 14 g

Single Row of 2

1 plate 20m 7 g PLA

A1 mini, P1S, X1, H2D, A1, P1P, H2D Pro, X1E, H2S, X1 Carbon, P2S, H2C, X2D, A2L

• Ready to slice & print • No supports • Fits A1 Mini

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1 · Row of 2

20m 7 g PLA · 7 g

Single Row of 3

1 plate 26m 11 g PLA

A1 mini, H2D, P1P, H2S, H2D Pro, X1, X1 Carbon, P1S, X1E, A1, P2S, H2C, X2D, A2L

• Ready to slice & print • No supports • Fits A1 Mini

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1 · Row of 3

26m 11 g PLA · 11 g

Single Row of 6 for 5mm Thick Skadis (Vallejo)

1 plate 39m 15 g PLA

A1, P1P, P2S, X1E, A1 mini, H2D Pro, X1, H2S, H2D, P1S, X1 Carbon, H2C, X2D, A2L

Same design as the original but with the peg depth brought in by .35mm. Shown in the image, 5mm depth on the top, 5.35mm on bottom.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

39m 15 g PLA · 15 g

0.2mm layer, 2 walls, 15% infill

1 plate 29m 8 g PLA

A1, H2C, P2S, X2D, X1, H2S, P1S, P1P, X1 Carbon, A2L, X1E, A1 mini, H2D Pro, H2D

I needed a holder for three bottles that fits the 5mm width Skadis board, so here it is.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

29m 8 g PLA · 8 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

This is a new version of my previous collection of modular Skådis holders for Vallejo, and other known brands with dropper bottles such as AK, Army Painter, Scale 75, Green Stuff World and Two Thin Coats.

Redesigned from the ground up, it now matches the aesthetics of my Skådis Full Row Holders for Citadel Pots .

It has a slightly tighter fit to the Skådis board, and you no longer need to do a lot of homework to figure out how to fill your rows! 😄

I present to you a ready-made selection of thoughtfully redesigned modules, ready to slice and print .

________________________________________

Create full rows of paint dropper bottles, on any Skådis peg board*!

Modular system: combine parts to create full rows
Snug fit and sturdy design
Visible labels for all your paints, even the new Vallejo bottles
Seamless combination
Easy and economical print

_______________________________________

*Announcement:

It has come to my attention that there is some thickness variation in the Skadis boards.

It is highly recommended you print this measurement tool by maker AU3D to see if you have a regular or a thinner version.
These paint bottle holders will nicely fit the board that measures around 5.2. Anything below 5, the holders will likely sag.

I will be updating this model very soon, to fit the thinner board. Stay tuned!

________________________________________

SKÅDIS LARGE
76 x 56 cm / 30 x 22"

________________________________________

SKÅDIS MEDIUM
56 x 56 cm / 22 x 22"

________________________________________

SKÅDIS SMALL (vertical)
36 x 56 cm / 14¼ x 22"

Check the assembly guide for your board, for full instructions how to best make use of the space and fill your board to the MAX!

Skadis Large | Skadis Medium | Skadis Small (vertical)

Note that this v2 version is not compatible with previous v1.

paint paint accessories paint organizer skadis skadis ikea ikea ikeaskadis vallejo 17ml 18ml

More by Pakulia

Skadis Modular Paint Rack - 6

Paint Rack for Citadel 12/18ml - Skadis Full Rows

See more prints by Pakulia...