Log in to join the conversation.
Jisogi 1.5 Organizer - Sleeved
Print Profile 25h 18m 866 g PLA
Plate Details (8)
Jisogi 1.5 is a great game, but the included box organizer is hilariously bad with significant lid lift for no good reason. Without the included organizer, there's plenty of room for all components and some extra flair. This organizer features pull out trays that can be placed directly onto the table for immediate play and supports sleeved cards. With the extra space, the Genki card display holder is expanded and sloped to improve views from around the table. An optional decorative spacer piece is provided to reduce the amount of movement inside the box but is not required.
If not using the Bambu profile, use print these print settings to maximize speed and minimize filament use:
Wall Loops: 3 (1.2mm)
Top layers: 0
Bottom layers: 0
Infill: 20%
Infill pattern: Honeycomb (or your preference, this will be exposed)
Print Quantities: Print one of each except items labelled as x2 (either on the plate description or the filename)
Update 8/7/2026: Added 2 alternate files as requested for pull out player trays. To keep things simple, this has been included as separate .stl files to keep the main 3mf clean. The two alternate files together replace the original “jisogi-card-base-x2” file.
Update 8/10/2026: Previous print profile accidentally used an older version of the genki and player trays that were shallower. If you already printed them, they work just fine, the updated one uses the extra height available in the box to make the Genki trays steeper. Also added the option with one plate that has the pull out player trays. Added photo showing manual and boards in the box, and updated the assembly diagrams.
Update 8/16/2026: Made the center dividing wall for the Genki cards thicker as requested.
Updated 8/23/2026: Adjusted the card holders to better support the sleeves that came with the kickstarter. Note that the removable alternate card trays could not be widened and may be slightly snug with the larger KS sleeves.
Updated 8/31/2026: Changed the box style of the ALTERNATE design which gave it a few more mm of clearance based on feedback. Should be much easier to insert and remove now.
Community photos
Print comments
1 of 1 maker says it printed well
Overall, a pretty nice insert. A little difficult to extract the Dead Inside cards from their holders and access the bits underneath; would also have preferred the spacer to be taller (with cutouts to help hold the player boards and Trend board in place). Also, I didn't print everything in Honeycomb infill without the top or bottom layers because for many of the pieces, it actually prints faster (and with better bed adhesion) with the top/bottom layers present and with Adaptive Cubic infill --
