LayerUp Stats 7

Add Jul 14, 26 Sync Aug 29, 26

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Portable Collapsible Dice Tower

Dice Towers & Trays Free

View on MakerWorld 1,120 4,990 Added Sep 21, 24 | Updated Aug 29, 26 Support PCHuDSoN by Liking and Boosting their model.

Remix View the original model (Printables)

Plan Your Print

About 88 g of filament From the designer's print profile

Print Profile (5) 0.2mm layer, 3 walls, 15% infill 3h 51m 88 g PLA

0.2mm layer, 3 walls, 15% infill

1 plate 3h 51m 88 g PLA

P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Supports are only needed on the top of the tower and is built in to the profile.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

3h 51m 88 g PLA · 88 g

0.2mm layer, 2 walls, 10% infill

1 plate 3h 39m 83 g PLA

A1 mini, X1 Carbon, H2D, X1E, A1, P1P, X1, P1S, H2D Pro, H2S, P2S, H2C, X2D, A2L

Someone asked me to provide an A1 mini version. Also changed the layout to reduce Y axis movements improving print time.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

3h 39m 83 g PLA · 83 g

112.5% with ladders & hidden message

1 plate 6h 47m 119 g PLA

A1, P1S, P1P, X1 Carbon, X1E, X1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

0.2mm layer, 3 walls, 15% infill I figured a small embellishment on the inside wouldn't hurt so I made ladders on the inside walls(actually capitol “i”s turned 90 degrees) and a message around the inside of the top of the tower which can be easily changed and it's (not visible when it's assembled). I also aligned the model so the print from my PLA silk would have the same/similar pattern when assembled(auto arrange breaks this). This only matters if you care where the windows are.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

6h 47m 119 g PLA · 119 g

A1 profile antispaghetti top tower, different supports

1 plate 4h 7m 90 g PLA

A1, H2S, P2S, P1P, X1E, X1 Carbon, P1S, X1, H2C, H2D Pro, H2D, X2D, A2L

I got spaghetti on top element because of manual support, none using tree support A1.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

4h 7m 90 g PLA · 90 g

a1 mini 150% 0.2mm layer, 2 walls, 10% infill

3 plates 10h 17m 235 g PLA

A1 mini, P1S, H2S, P1P, P2S, H2D Pro, A1, X1E, H2C, X1 Carbon, X1, H2D, X2D, A2L

Plate Details (3)

0.4 mm nozzle, all plates

Plate 1

4h 4m 113 g PLA · 113 g

Plate 2

4h 86 g PLA · 86 g

Plate 3

2h 13m 36 g PLA · 36 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

I printed this dice tower but after some time I realised I wanted more from it, so I put together this remix.

The middle parts are the same but to the top I added a nub, so when closed up it holds itself in place and so it a lot better for transporting.

I also put in some slots for intersecting with the base.

The Base has added extended sides so that when you pack the tower together it doesn't freely spin around.

The original model just had a channel so the lid and base can slide together, however that also means it just slide straight out the bottom. I added an angle to each part so it can slide thought, is still printable without support in that area and sits nice when in use.

The model is also reduced in side compared to the original, less material, more compact and prints quicker and can still deal with 6 dice, although 4 probably works the best.

Can also fit 2 complete set on one P1/X1/A1 build plate.

travel