Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
D&D Dice Tower for dice trays
Dice Towers & Trays
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 45 g of filament
From the designer's print profile
Print Profile (2) 0.2mm layer, 2 walls, 10% infill 1h 23m 45 g PLA
0.2mm layer, 2 walls, 10% infill
1 plate
1h 23m
45 g PLA
P1S, X1, H2D, H2S, H2C, P2S, P1P, X1 Carbon, X1E, A1, H2D Pro, X2D, A2L
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
1h 23m
45 g
PLA · 45 g
More hinge tolerance
1 plate
1h 16m
45 g PLA
X2D, P1P, H2C, H2D, P1S, X1 Carbon, P2S, X1, A1 mini, A1, H2S, X1E, H2D Pro, A2L
Slightly changed the model tolerances at the hinges if you are having issues that it won't close properly!
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
1h 16m
45 g
PLA · 45 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
I just started with my first pen and paper and wanted a small but fully functional dice tower for my session.
I tried the dice tower from the creator about30cows and it worked really well, but unfortunately for me there was just no way to attach it to the dice board I'm using. (check out his “Ultimate Player Kit” it's awesome!)
I therefore designed my own one with his model being the major inspiration!
For the hinge, you just need to push some filament through the holes.
The gap in the back is 4mm x 38mm and the dice tower is 50mm wide.
It uses (4x) 6mm x 2mm magnets (they need to be glued, not a press fit model if you use the provided printing preset)