Targi - Coin and Expension Tokens

Coin and tokens for the expantion of Targi.

The coin should be printed with the smalles nozzle available at a slow speed (~20mm/s) at an angle of 45° with support and brim. Also the size of the coin should be adjusted to 30mm in diameter and a hight of 3.2mm.

The action token is a big size. It should be sized down to ~8% or as you wish. Here also the nozzle size should be as small as possible and the speed also ~20mm/s with brim.

For the water (vase) there are 3 differenz sized for the different values that they are worth. The model here can be split so that individual vases can be print. Again, print with small nozzle and not too much speed (~30-40mm/s).

Thanks a lot for your help @MrSimonPaints!