Sweet Lands Deluxe Organizer KOR

— A guide for printer users other than Bamboo Labs printers.

This is the quantity needed for printing. If you download the STL file directly and print it with a third-party printer, please refer to this.

It's based on objects, not plates. When you receive it as a compressed file, for easier printing, the parts that were duplicated by plate are then added to a separate file, increasing the number of components. Please check the file name and print only the required quantity according to the criteria below.

obj_1_ Citizen Card Tray x 1

obj_2_Personal Tray A x 4ea

obj_3_ Character Meeple Tray x 1

-----------obj_4_ ignore

obj_5_ Tiles A x 1ea

obj_6_ Resource Token TrayA x 2ea

-----------obj_7_ Ignore

obj_8_ Small Panel n Tiles B x 1ea

obj_9_ Main Unit_1 Card and Start Marker x 1

obj_10_ Lid_Special Terrain Tile x 1ea

• The rulebook thickness is not calculated, so the lid opens exactly as thick as the rulebook. I came too far to fix it, so I gave up on fixing 😢
• Citizen cards can use the upgrade pack sleeves and are all stored in one tray, so you can take them out and use them as they are.
• Each player has a personal tray separated by tiles and components they need.
• The resource tray is divided into two parts. Place it across the table and use it comfortably.
• Single-player cards are stored at the bottom of the special terrain tile. Just remove the front player marker and round marker and close the lid.
• This tray is designed to protrude from the top over the bottom for efficient use of space. It can be slightly pointed. Note
• Organize the inside of the tray like this.

• Roughly gather all the large boards and lay them on the floor, sticking them as close to the corners as possible.
• Divide two large, elongated boards and place them on both sides. The styrofoam in the middle is the thinnest reinforcement material filling the corners, so it's fine if it's missing.
• Place the citizen card tray in the corner.
• Move the planning board and character board to the left.
• Stack two resource trays neatly in the empty space at the top. Close to the left
• Attach a special terrain tile tray to the top of the citizen card,
• Place upgraded character meeples in the empty space at the top.
• Place a tray containing advanced technology tiles, final score tiles, basic support tiles, and pass support tiles on top of it.
• The empty space at the end of the citizen card tray and where special terrain tiles are attached will be perfect for trays that use "imitation boards" as lids. Please upload it.
• Place 4 trays containing individual player components on the left side and fill them up.
• There will be plenty of space for the round support board, the turn order board for the transformation rules, and the tech tile tray from the upgrade pack, and even if you put all three, there's plenty of space. Raise it.
• And if you roughly upload the rulebook, End of summary.
• In fact, I didn't calculate the rulebook space separately when designing it, and by the time I realized that, the work was almost finished, so I gave up on making revisions. If you find the rulebook a bit messy and uncomfortable, put it together with the main game board when you upload it at the start of your organization. That way, you can make the box lid evenly open as thick as the rulebook (?)

Fonts used for engraving on the organizer: Nanum Gothic (citizen card tray) and Reko-style (personal tray).

-End-

--Update. 25.08.19

When using the Resource Tray x2, some resources were difficult to retrieve, so we added a gentle curved slope to one end of the tray so that resources can be lifted along the slope. If you found the existing resource tray inconvenient, just print out the resource tray and use it again.

Since this isn't a dramatic modification, if you didn't find the existing tray too inconvenient, you can use the existing tray.

--Update. 25.09.04

Added "Personal Tray Lid" to the output profile.

Since the previous organizer design was already working with almost no free space, we had no choice but to make the wall of the lid as thin as possible. Even though they're made so thin, if you cover all four trays with lids, they become very stiff, so you need to be careful when organizing. The lid itself opens easily by gently inserting your fingertip into the groove on the side and pulling it open. (Depending on the output condition, it may be a bit stiff.) Since it only serves as a lid, small meeples inside the tray still get messy when standing vertically. Just use it for storing it vertically, so that personal meeples only get messy inside the lid of the personal tray.

※ Since this organizer was designed from the start without vertical storage in mind, even at this point in which the lid is provided, vertical storage and lid use are still not recommended.

--Update. 25.09.09

Add Print Profile

Sweet Land English Ver. Parts Only

--Update. 25.11.04

Add Print Profile

Sweet Land Spanish Ver

by @ xgruber

--Update. 25.11.20

Add Print Profile

Skill Tiles Tray — Standard Edition Only

--Update. 25.11.25

Add Print Profile

Sweet Land French Ver.

by @ Pandora

--Update. 25.11.29
Temporarily hid the split tray version (for small bed sizes) due to alignment issues reported by users.
I will upload it again after reviewing alternative methods for splitting the model.