Imhotep Board Game Insert

**Update** - February 20, 2023 - I have created a [new insert](https://www.thingiverse.com/thing:5867859) that will hold both the base Imhotep game and the *A New Dynasty* expansion.
***

**Update** - October 8, 2020 - I have uploaded two additional files to accommodate a request for sleeved cards:
1) Imhotep_Box_Insert_-_Sleeved_Market_Card_Holders.stl (card slot is 72x18mm)
2) Imhotep_Box_Insert_-_Sleeved_Round_Card_Holders.stl (card slot is 72x12mm)
These have had their widths increased by 50% and their length increased by 2mm.
***

I wanted an easy way store and setup the stones (and sled) for each player, so I started out designing the Stones Holder. Once that was done, I felt the rest of the box needed an insert to prevent the stones holders from moving around and dumping the stones; so, the rest of this insert came into being. Note that the stone holders are designed for 15mm wooden cubes.

You will need to print just one of every model, except the stones holder; you will need to print 4 of those.

The insert for the boards and boats was made to be printable on an Ender 3 (220mm max bed size), which is why it is separate from the card holder inserts. After printing, I glued my card holder inserts to the board and boats insert to have a 'single' piece insert.

Lastly, this insert is not a super-tight fit in the box. There is a couple of mm gap around the entire thing to accommodate the cardboard insert that came in the box. I didn't want to damage it by putting pressure on it.