LayerUp Stats 13
Add Aug 4, 26 Sync Aug 9, 26
Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

SHŌBU Board Game and Pieces

for SHŌBU (2019) Layer by Layer
Scerakor
Boards & Maps Free
View on MakerWorld 5 6 Added Apr 27, 26 | Updated Aug 8, 26 Support Scerakor by Liking and Boosting their model.
Plan Your Print
About 124 g of filament From the designer's print profile
Print Profile (3) 0.28mm layer, 2 walls, 10% infill - 4 plates, 4 Colours 4h 9m 124 g PLA
0.28mm layer, 2 walls, 10% infill - 4 plates, 4 Colours
4 plates 4h 9m 124 g PLA
A1, A2L
4 Plates and 4 Colours (technically - You can do everything with just black and white if you want) 2 x Board plates have a colour/filament switch/pause for contrast in lines. 2 x plates for game pieces. If you don't like the conical white pieces, print the other set with the second colour.
Plate Details (4)
0.4 mm nozzle, all plates
Plate 1
1h 30m 53 g PLA · 27 g PLA · 26 g
Plate 2
1h 27m 50 g PLA · 24 g PLA · 26 g
Plate 3
35m 9 g PLA · 9 g
Plate 4
37m 12 g PLA · 12 g
0.16mm layer, 2 walls, 15% infill
2 plates 4h 29m 103 g PLA
A1, X2D, P1S, A2L, X1 Carbon, X1, P2S, H2S, H2C, H2D, P1P, H2D Pro, X1E
Slight modification to the original model to allow for asymmetric play (i.e. at a distance). W,X,Y, and Z indicate the board and move can be indicated by identifying the origin and destination grid spaces. Since there are two moves per turn, an example would look like: Passive: X A1-A3, Active: W B2-D4
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1
2h 17m 53 g PLA · 25 g PLA · 28 g
Plate 2
2h 12m 50 g PLA · 24 g PLA · 26 g
0.16mm layer, 2 walls, 8% infill
1 plate 3h 11m 41 g PLA
A1, H2S, P1P, X1 Carbon, H2D Pro, X1, H2D, P2S, X1E, H2C, A2L, P1S, X2D
Simple box to carry your 4 x game board pieces with the “Shobu” label on the sliding lid. Original box (and the one shown in the picture) was for the Hnefatafl board game I designed, but the quadrants are the same size. This one says “Shobu”. AMS required for the label on the lid.
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
3h 11m 41 g PLA · 40 g PLA · 1 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description

Here is my 3D printer version/adaptation of the game of SHŌBU. This board comes in 4 pieces that fit together with wedge sections to make an entire playing board. Traditionally, 4 separate boards are used (2 dark, 2 light) with a rope separating the two sides. This is an abstract game that is played in two parts. First, a player may move one of their stones up to two spaces in any direction, including diagonally, in what is called a passive (or set up) move. Second, they take a more aggressive move, which must be the same direction and number of spaces as the first move. It is this second move that allows you to push stones across the board - or off the board's edge. Remove all four of your opponent's stones from just one of the four boards to win.

Full description (part of the description above taken from there as well) and rules found at: https://boardgamegeek.com/boardgame/272380/shobu

I have included plates for two different sets of playing pieces, but feel free to use your own. Some don't like the conical pieces in this model as they may slip too much in your fingers. If this is the case for you, re-print the other model in the opposite colour.

No AMS required - print pause/filament switch added for the board pieces so that the lines and text show through as a different colour.

shobu abstract game strategy game two player game
SHŌBU box art SHŌBU 2019 Layer by Layer
Cover Colors

Main colors from the cover art. Find matching filament, or tap swatches to narrow.

Matching filament