Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Top Loader Pokémon card Display
Card & Tile Holders
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 5 g of filament
From the designer's print profile
Print Profile (3) 0.12mm layer, 2 walls, 15% infill 20m 5 g PLA
0.12mm layer, 2 walls, 15% infill
1 plate
20m
5 g PLA
P1S, P1P, X1, X1 Carbon, X1E, A1, A1 mini, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
20m
5 g
PLA · 5 g
A1 Mini - 0.12mm layer, 2 walls, 15% infill
4 plates
4h 26m
59 g PETG
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
Print profile made for A1 mini.
There are 4 plates with 1, 2, 4 or 8 holders
I used a generic petg but you can pretty much use any filament you want
Plate Details (4)
0.4 mm nozzle, all plates
Plate 1 · 1 holder
32m
4 g
PETG · 4 g
Plate 2 · 2 holders
44m
8 g
PETG · 8 g
Plate 3 · 4 holders
1h 8m
16 g
PETG · 16 g
Plate 4 · 8 holders
2h 2m
31 g
PETG · 31 g
0.16mm layer, 2 walls, 15% infill
1 plate
22m
5 g PLA
A1, A2L
Landscape version of Top Loader card Display base.
Print Profile made on A1
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
22m
5 g
PLA · 5 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
Hello all, I am sharing one of the first models i made for my sons Pokémon card collection. He needed something to display his top loaders on his shelf in his room.
-no supports
-simple print
prints in about 20minutes on the p1s with bed level, just over 14 minutes at a .12 layer with the base profile but can be done in the standard .2 profile
For Commercial License for this or any of my models please consider checking out
