Bargain Quest - Organizer

This organizer is designed to print with a .8 nozzle .4 and .2 will work fine as well. The box is tight. I've allowed about 1mm play between all the boxes so make sure you have esteps and flow correct. Your printed walls should be 1.6mm thick. It will fit all of the Bargain Quest expansions minus the player boards, those will need to go in the Black Market Box. Sadly the creators of the game went on a Bargain Quest when designing the box, and there is zero chance to get everything in 1 box. To get the coins to fit you will have to stack them because again, almost no space in the box.

The Card trays can function as player aids. You will need to use a perfect fit sleeve, I've included a picture of the sleeves I used as seen in photos. They are cheep and all over ebay if your LGS doesn't carry them. The sleeve dimensions are 64.5mm x 90mm.

To print this organizer print the following parts in the following quantities.
4 x Standard Card Tray
1 x Token Tray
1 x Top Tray

On small beds you may need to turn off skirt you will need the full build plate for the Top Tray. 190mm x 190mm

Enjoy