Mini Rogue (Card, Token) Big Box Extension

This is a box extension frame made to fit the Mini Rogue Season 1 or 2 package case.
(Since the sizes of Season 1 and 2 boxes differ slightly (in my case, the Season 1 retail box is slightly small), the bottom box may be slightly loose when assembling.)

[Key Features]

• All Mini Rogue Season 1 and 2 cards and token accessories can be stored together through box extension
• Relatively easy to store upright
• Organizes cards using a card divider (90x70mm recommended) (the paper divider shown in the photo is attached to Raw Files as an output file)
• (Attached output profile) Hinged cover on the token box designed to stand the game box upright (requires 3x2mm magnet)

※ When inserting the lower box into the box extension frame, open the frame parts to prevent scratches.

※ Season 1 and 2 play mats and rulebooks must be stored separately in the remaining boxes.

If you have too many play mats and need limited box space, please refer to [Mini Rogue (Mat) Big Box Extension].
(See https://makerworld.com/en/models/2770007-mini-rogue-mat-big-box-extension#profileId-3076724)

[Additional Information - When replacing the token tray with the separately attached hinge token box]

• For items like token boxes or hinge cover fixing parts, use adhesive to place 3x2mm magnets in each. (Storage and fixing available)

(Note: When using a hinge box, the hinge part of the case is thin, so under heavy load, the hinge part of the lid can easily break.)

※ If the bottom appears to be attached when printing the case,

If you carefully fold the hinge part, the attached part is thin and comes off relatively easily.

(For smooth operation when printing the hinge section, we recommend using a 0.12mm layer output.)

(For Insert Divider, Hinge Box)

※ Please note that this method uses Bamboo Studio's top/bottom layer 0 and internal fill output settings.

(If you are printing with another slicer, please use the internal fill settings separately.)

(+ If you are concerned about the durability of the mesh section, you can reset the output settings for that part of the object to output in a filled form.)