LayerUp Stats 7
Add Jul 14, 26 Sync Sep 3, 26
Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Dice collection box and rolling tray

for Tabletop Accessories Layer by Layer
Thibault01
Dice Towers & Trays Free
View on MakerWorld 32 84 Added Nov 22, 25 | Updated Sep 3, 26 Support Thibault01 by Liking and Boosting their model.
Plan Your Print
✓ Optional multicolor profile The designer also offers a multicolor way to print this (an MMU/AMS profile or per-color parts)
About 282 g of filament From the designer's print profile
Print Profile (2) 0.2mm layer, 2 walls, 15% infill 8h 39m 282 g PLA
0.2mm layer, 2 walls, 15% infill
5 plates 8h 39m 282 g PLA
P1S, A1, P2S, P1P, H2S, X1, X1 Carbon, H2C, H2D, X1E, H2D Pro, X2D, A2L
0.2mm layer height print in place AMS required for the art on the top lid
Plate Details (5)
0.4 mm nozzle, all plates
Plate 1 · Tray A
2h 59m 110 g PLA · 110 g
Plate 2 · Tray B
3h 25m 114 g PLA · 2 g PLA · 103 g PLA · 9 g
Plate 3 · Hinge Pins and Hinge Caps
20m 2 g PLA · 2 g
Plate 4 · Divider if not using TPU Pads
59m 29 g PLA · 29 g
Plate 5 · Divider if using TPU Pads (Height adjusted)
56m 27 g PLA · 27 g
Optional TPU Pads to insert in the box
2 plates 5h 17m 72 g TPU
A1, H2D, P2S, H2S, H2D Pro, X1, X1E, P1S, X1 Carbon, H2C, A1 mini, P1P, X2D, A2L
Print in TPU I recommend using a little bit of stick glue on your plate as a release agent
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1 · TPU PAd tray B
2h 38m 36 g TPU · 36 g
Plate 2 · TPU PAD Tray A
2h 38m 36 g TPU · 36 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description

This dice Box can hold 7 dice sets. It can also be used as a dice tray to roll those crits.

Optional TPU Pads uploaded in a separate print profile. It makes rolling with metalic dice much more silent.

The divider in the bottom tray is removeable to double to rolling tray space.

The model has been designed to include the ability to insert 2x8mm magnets but the latching mechanism as designed is more than enough to hold the box firmly closed.

The hinge mechanism is tight enough that the hinge action is perfectly smooth.

The hinge cap should simply snap in place. No glue needed.

Note that there are two version of the divider: one to use with the TPU pads and one to use without (the divider height has been adjusted to be flush with the box when open).

Also note that an AMS is required for the art on the top lid.

Boost Me Thanks a lot if you are considering boosting this model :)

dice rolling tray dd d and d roll container collection dnd dicebox