Phase 10 Compatible Compact Travel Box

There are likely many different card sizes over the years this has been printing so PLEASE double check your cards!

This will fit up to 59mm x 91mm size cards with a 34mm high deck . It fits the newest print, but I can't guarantee another version. Please measure and if you have any problems message me directly. No sleeved version at this time but if you want a sleeved version contact me, and be ready with dimensions. Lid and _mc box are designed for multicolor printing, instructions below.

Notched Lids: The lid has small notches to align the lid closed. It should be slightly loose and snap shut with a click, and shouldn’t fall out if shaken. If the lid is too tight you can lightly sand the edges until fit. If too loose, reprint and increase the size by .1 or .2mm in the notched direction only.

Multicolor printing: In your slicer right click the object and select Split>to parts . Select the colors for printing. PRO TIP: first make the entire object the color of the design and then you only have to change the color of the main piece instead of every small piece.

Layer Height Color Change: In your slicer you can add a pause/color change at the appropriate layer. This is a different process depending on the slicer, but usually follows these steps. Slice the object, then drag the viewer until you reach the layer you want to change color. Right click on the layer bar and select “Add Color Change” or “Change Filament”. Reslice the object and check to be sure you have selected the correct layer. Your printer will either pause and walk you through a color change, or automatically change color.

Happy Gaming!

_______________________________________________________________________________________

Check out all my free designs here on Printables! If you want to support my work and all of the free designs I bring to the community consider buying something from my Etsy shop or my Printables Store .