Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Gloomhaven Buttons and Bugs Drawer Insert
Inserts
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 133 g of filament
Print Profile (3) 0.2mm layer, 2 walls, 10% infill 3h 48m 133 g PLA
0.2mm layer, 2 walls, 10% infill
3 plates
3h 48m
133 g PLA
A1 mini, A2L, P1S, H2D, X1, H2S, X2D, X1E, P1P, H2C, X1 Carbon, H2D Pro, A1, P2S
• 0.2mm layer heigth
• 10% density
• PLA or others
• no AMS
• Normal supports (just buttons)
Plate Details (3)
0.4 mm nozzle, all plates
Plate 1
1h 19m
46 g
PLA · 46 g
Plate 2
2h 11m
85 g
PLA · 85 g
Plate 3
18m
2 g
PLA · 2 g
Drawers for Sleeved Cards
1 plate
1h 3m
34 g PLA
P1S, X1E, P1P, H2S, H2C, X2D, H2D Pro, A2L, X1, X1 Carbon, H2D, P2S, A1 mini, A1
I thinned the walls of the wide drawers and removed the walls of the thin drawers to accommodate sleeved cards.
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
1h 3m
34 g
PLA · 34 g
Condition Drawer for base game + pub crawlers
1 plate
32m
14 g PLA
P1S, H2D, A1 mini, H2S, X1 Carbon, H2D Pro, A2L, X1, P1P, P2S, H2C, X2D, A1, X1E
This is a modified condition drawer to accommodate all of the condition makers from both the base game and pub crawlers
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
32m
14 g
PLA · 14 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
Hello
I created my own version of insert for Buttons&Bugs to fulfill my needs and visions, hope you will like it as well.
(Polish version of Buttons & Bugs just came out so the timing to print one is just right :)
I thinks the design is thematic and simple enough to be both usable and good looking.
It's a drawer with buttons for the knobs, accomodating everything, with instruction put on top.
The adventages of design:
- clear ans simple segreation of components
- ease of grabbing cards and condition tokens when needed
- thematic look to better suit the immersion in the game
- 2 different options for shelves, one side with button knobs, the other with gaps for fingers)
Printing tips:
- Use either brims or corners with the shelves to get bottoms even and stick to the plate
(try using different filaments if the bottom is still curving, I used two types, one worked, the other didn't)
- For the buttons I recommend 2mm nozzle . You can also try scaling them to 101% - 104% for a snap fit. I used glue to secure them tightly
I hope you will like my version of this insert :)
