Origin Story - 3D Organizer Sleeved No Box Lift

Origin Story 3D Organization

I tremendously enjoy this game. I wanted it sleeved. I designed this insert to fit Gamegenic Premium Sleeves with a few very small modifications. Everything fits, but it is very tight. There is next to no box lift in mine.

Sleeves:

• I sleeved my game with all Gamegenic Premium Sleeves.
• Playing Cards - Gamegenic Grey Size
• Event/Story/Vancardian Cards - Gamegenic Green Size
• Superhero Ref Cards - Gamegenic Magenta NOTE: I cut the top of these off to about 102.5mm to make them fit the card better. I use a straight paper cutter to do so.

Notes:

• Optional Magnets: I used 4 imbedded magnets to hold the Stamina Lid on the Stamina Box. I don't believe they are necessary, I just like to use them.
• Magnet Size: Round 4mm diameter x 2mm thickness
• The Holes in the Event/Solo box are meant to have the first player counter rest inside of them. without doing this, there is about 2mm of box lift.
• This insert is very tight. It will compress your sleeves.
• With as tight as this insert is, I wanted to offer some instructions for packing:
• OS_Event_Solo:
• Small Side: All of the Event Cards and the 2 Player Aids for Solo Mode
• 4x 1/2 cards for Solo and all remaining solo cards
• OS_HeartTokens:
• All of the Stamina Tokens
• OS_SH_Play_StoryCards:
• Superhero Ref Cards
• Playing Cards
• Story Cards

Print the following for Organization:

1x OS_Event_Solo_v2

1x OS_HeartTokens_Bottom_v2

1x OS_HeartTokens_Top_v2

1x OS_SH_Play_StoryCards_v3

I designed this to be storable both flat on the bottom and sideways in a Kallax.

Noted Instructions:

It was Printed at .2 Layer Height. 15% Infill