Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Planet Unknown Customizable Tile Covers
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 54 g of filament
From the designer's print profile
Print Profile 1h 49m 54 g PETG
What it takes
1 plate
1h 49m
54 g PETG
P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
1h 49m
54 g
PETG · 54 g
Designer's Description
The original version printed assuming a gap of 16mm between the top of the tiles and the box lid. The height can now be configured to as small as 1mm and as much as 25. Also, the edges that touch the tiles have been rounded to reduce the chance of wear or surface abrasion.
Lay a straight edge across the open box with the SUSAN inside and measure the average distance from the top of the tiles to the bottom of the straight edge. this is the distance to input into the parameter for “input height”.
If your carousel has some significant differences in heights, you can print using several runs with different input heights. For each run, break into parts and delete the pieces which you don't want to print.
