RPG/Game - Clickable Health Counter w/ +/- Toggle

Scoring & Tracking Free

Plan Your Print

✓ Optional multicolor profile The designer also offers a multicolor way to print this (an MMU/AMS profile or per-color parts)

About 77 g of filament From the designer's print profile

Print Profile 3h 2m 77 g PLA

What it takes

2 plates 3h 2m 77 g PLA

P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Colour swaps needed. AMS not needed, but it is easier with it. No extra hardware needed for assembly.

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1 · Colour Swap alternating at each pause.

1h 18m 34 g PLA · 34 g

Plate 2 · AMS Painted

1h 44m 43 g PLA · 36 g PLA · 7 g

Designer's Description

Membership Welcome aboard!

RPG - D&D, Pathfinder etc.

Clickable Health Counter, w/ +/- Toggle.

OR it could be used to keep track of other items etc. in other board games as well.

I got a few requests for me to make this one, as my previous one needed 3x screws for assembly.

But I ended up having too, pretty much redraw the whole thing.

You need to do a couple Colour 1 & Colour 2 Filament swaps.

To make the Numerals nice and readable. and the +/- Symbols as well.

(unless you have an AMS and do it that way, I added building plates for both)

The pauses I used are in the Print Profile.

Start with Colour 1, and at every pause, swap between Colour 1 & Colour 2.

Do the reverse.

Makes a Satisfying clicking feel/sound as you rotate the number disks.

And then just slide the switch to indicate positive or negative numbers.

It will snap together with a bit of force.

( My method of snapping together is to lay it flat on a counter top, then lean onto it with the palm of your hand, and it'll snap in.)

I also recommend placing the toggle switch into the top cover, and it'll hold it in there while you snap it down.

rpg accessory dnd pathfinder counter

More by XmonikerX