Cubitos Insert [/w Fowl Play]

I did a remix of the excellent Insert by @stringham which was a remix of SalmonSquire over on Thingiverse.

I added the slot again which was available in the original by SalmonSquire, to hold the cards associated with the die.

Furthermore I did not like that I have to store the credits, the fan tokens and the playing material for each player in a ziplock bag. So I decided to add new boxes for them. I also took another card box and not the one by stringham. Because you still have to store the bigger black die and the 4 excess dice anywhere. So I chose to look what others have done and just copied the one from mrgigg on Thingiverse.

I deleted all the pins on the caps but left the lips on the boxes. Now you don't need brute force to assemble the boxes [Thanks to @MrSnowball for that suggestion].

Moreover I was annoyed that the lids would not run as smooth as they do with Bambulab Matte PLA, so I made some adjustments to the lids.

They are now thinner by 0.1mm and added a chamfer on both sides. I can't make any promises for the durability of the lids, but in my tests they are just as durable.

• I would recommend that you print the boxes on a heated plate [50°C to 60°C], because I had warping issues on my P1S with my cool plate. With the textured PEI plate that came with my P1S the results are very good.
• Also if you have Matte PLA available I would recommend using it. The lids run much better with Matte PLA.
• Basic PLA and PLA from eSun and elegoo I would not recommend for the boxes.

Also I have added the suggestion that @MrSnowball had and deleted the tension nob on the box at his suggested spot in the Photo. Since then assembly is also much easier.

You won't need to print the boxes for the dark grey and grey dice. Those dice are now stored sepperatly in the players boxes and the excess dice have their place in the card tray.

Boost Me I appreciate every boost, but I am also happy if you just like and print it.
Have a nice day :)