LayerUp Stats 3

Add Jul 14, 26 Sync Aug 31, 26

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

TCG Sorting tray

for Tabletop Accessories Layer by Layer

Zunan

Organizers Free

View on MakerWorld 94 210 Added Feb 6, 26 | Updated Aug 30, 26 Support Zunan by Liking and Boosting their model.

Plan Your Print

About 473 g of filament From the designer's print profile

Print Profile (7) 0.2mm layer, 2 walls, 15% infill 14h 52m 473 g PLA

0.2mm layer, 2 walls, 15% infill

6 plates 14h 52m 473 g PLA

X1 Carbon, H2S, P1S, P2S, H2D, P1P, X1E, H2D Pro, H2C, A1, X1, X2D, A2L

Does not need support, does not require brim. Print at desired height, preferably 0.2 layer height.

Plate Details (6)

0.4 mm nozzle, all plates

Plate 1 · 1x1

57m 28 g PLA · 28 g

Plate 2 · 1x2

1h 42m 53 g PLA · 53 g

Plate 3 · 2x1

1h 43m 53 g PLA · 53 g

Plate 4 · 3x1

2h 30m 80 g PLA · 80 g

Plate 5 · 2x2

3h 15m 104 g PLA · 104 g

Plate 6 · 3x2

4h 45m 155 g PLA · 155 g

0.2mm layer, 2 walls, 15% infill Tall version

6 plates 25h 25m 781 g PLA

X1 Carbon, P1P, H2S, H2C, P1S, H2D, X1, X1E, A1, P2S, H2D Pro, X2D, A2L

0.2 layer height no supports no brim needed

Plate Details (6)

0.4 mm nozzle, all plates

Plate 1 · 1x1

1h 33m 45 g PLA · 45 g

Plate 2 · 1x2

2h 50m 87 g PLA · 87 g

Plate 3 · 2x1

2h 51m 88 g PLA · 88 g

Plate 4 · 3x1

4h 14m 132 g PLA · 132 g

Plate 5 · 2x2

5h 46m 173 g PLA · 173 g

Plate 6 · 3x2

8h 9m 256 g PLA · 256 g

Angle adapter for sorting tray, 15, 20 and 30 degrees added.

1 plate 1h 33m 41 g PLA

X1 Carbon, A1, H2D Pro, H2S, H2C, P1S, P1P, P2S, H2D, X1, X1E, A1 mini, X2D, A2L

prints at 0.2 layer height. No brim, No supports

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

1h 33m 41 g PLA · 41 g

0.2mm layer, 2 walls, 15% infill Arachne version

6 plates 15h 44m 469 g PLA

X1 Carbon, H2S, H2C, P1P, A1, P2S, H2D, P1S, X1, H2D Pro, X1E, X2D, A2L

0.20 layer height No supports No brim needed

Plate Details (6)

0.4 mm nozzle, all plates

Plate 1 · 1x1

1h 27 g PLA · 27 g

Plate 2 · 1x2

1h 48m 53 g PLA · 53 g

Plate 3 · 2x1

1h 49m 53 g PLA · 53 g

Plate 4 · 3x1

2h 40m 79 g PLA · 79 g

Plate 5 · 2x2

3h 26m 103 g PLA · 103 g

Plate 6 · 3x2

5h 1m 154 g PLA · 154 g

0.2mm layer, 2 walls, 10% infill

2 plates 16h 18m 491 g PLA

X1 Carbon, H2D, H2C, X1, H2D Pro, X1E, H2S, A1, P1S, P1P, P2S, X2D, A2L

0.2 layer height. Support might be needed for critical regions No brim.

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1

9h 32m 294 g PLA · 294 g

Plate 2

6h 46m 197 g PLA · 197 g

0.2mm layer, 2 walls, 10% infill

2 plates 3h 25m 129 g PLA

X1 Carbon, X1E, H2D, P1P, H2D Pro, A1, H2S, X1, P2S, H2C, P1S, X2D, A2L

0.2 layer height No supports No brim

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1 · 3x2 Lid

2h 51m 111 g PLA · 111 g

Plate 2 · 1x1 Lid

34m 18 g PLA · 18 g

0.2mm layer, 2 walls, 15% infill

1 plate 45m 21 g PLA

X1 Carbon, P1S, X1, X1E, H2S, A1, X2D, H2C, P1P, A1 mini, H2D Pro, P2S, H2D, A2L

0.2 layer height. no brim. no support

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

45m 21 g PLA · 21 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

Made a modular sorting tray that can be expanded, and stacked.

Will come an angled tray that can be attached / combined

Printed in PLA.

Added Lid for 3x2 model and 1x1 model

Added Gridfinity bottom for 3x2 model

pokemon pokemon tcg tcg magicthe gathering onepiece card onepiece riftbound sorting stacking