← Kingdom Death: Monster ← CertainDeath

MakerWorld · added Dec 22, 2025 · updated Jul 22, 2026

115 downloads · 64 likes · 64 comments

LayerUp history

Added to LayerUp Jul 11, 2026

added by Scout

listing refreshed Jul 22, 2026

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Kingdom Death Monster Monster Box

for Kingdom Death: Monster (2015)

CertainDeath + Follow

Card & Deck Holders

1 plate 1h 27m 0.4 mm 56 g PLA Free

View Print on MakerWorld

Please support CertainDeath by Liking/Boosting their Print on MakerWorld.

Before you print

✓ Needs about 56 g

✓ Covers Kingdom Death: Monster – Campaigns of Death Expansion, Kingdom Death: Monster – Screaming God Expansion, Kingdom Death: Monster – Red Witches Expansion

Print profiles

Atnas Box

1 plate 1h 27m 0.4 mm 56 g PLA

Atnas Lid

1 plate 3h 29m 0.2 mm 16 g PLA

Black Knight Box

1 plate 1h 20m 0.4 mm 47 g PLA

Black Knight Lid

1 plate 2h 40m 0.2 mm 13 g PLA

Butcher Box

1 plate 1h 17m 0.4 mm 44 g PLA

Butcher Lid

1 plate 2h 21m 0.2 mm 12 g PLA

Crimson Crocodile Box

1 plate 1h 37m 0.4 mm 66 g PLA

Crimson Crocodile Lid

1 plate 4h 3m 0.2 mm 20 g PLA

Dung Beetle Knight Box

1 plate 1h 26m 0.4 mm 55 g PLA

Dung Beetle Knight Lid

1 plate 3h 13m 0.2 mm 16 g PLA

Dragon King Box

1 plate 1h 26m 0.4 mm 53 g PLA

Dragon King Lid

1 plate 3h 8m 0.2 mm 15 g PLA

Flower Knight Box

1 plate 1h 25m 0.4 mm 53 g PLA

Flower Knight Lid

1 plate 3h 2m 0.2 mm 15 g PLA

Frogdog Box

1 plate 1h 45m 0.4 mm 73 g PLA

Frogdog Lid

1 plate 4h 28m 0.2 mm 23 g PLA

Gambler Lid

1 plate 2h 40m 0.2 mm 13 g PLA

Gambler Box

1 plate 1h 20m 0.4 mm 46 g PLA

Godhand Box

1 plate 1h 13m 0.4 mm 42 g PLA

Godhand Lid

1 plate 2h 10m 0.2 mm 11 g PLA

Gorm Box

1 plate 1h 26m 0.4 mm 53 g PLA

Gorm Lid

1 plate 3h 2m 0.2 mm 15 g PLA

Gold Smoke Knight Box

1 plate 1h 16m 0.4 mm 42 g PLA

Gold Smoke Knight Lid

1 plate 2h 16m 0.2 mm 11 g PLA

Hand Box

1 plate 1h 14m 0.4 mm 43 g PLA

Hand Lid

1 plate 2h 13m 0.2 mm 11 g PLA

King Box

1 plate 1h 43m 0.4 mm 70 g PLA

King Lid

1 plate 4h 26m 0.2 mm 22 g PLA

Kingsman Box

1 plate 1h 17m 0.4 mm 44 g PLA

Kingsman Lid

1 plate 2h 20m 0.2 mm 12 g PLA

Lion God Box

1 plate 1h 22m 0.4 mm 49 g PLA

Lion God Lid

1 plate 2h 47m 0.2 mm 13 g PLA

Lion Knight Box

1 plate 1h 17m 0.4 mm 44 g PLA

Lion Knight Lid

1 plate 2h 22m 0.2 mm 12 g PLA

Lonely Tree Box

1 plate 1h 15m 0.4 mm 42 g PLA

Lonely Tree Lid

1 plate 2h 12m 0.2 mm 11 g PLA

Manhunter Box

1 plate 1h 19m 0.4 mm 45 g PLA

Manhunter Lid

1 plate 2h 29m 0.2 mm 12 g PLA

Pariah Box

1 plate 1h 23m 0.4 mm 53 g PLA

Pariah Lid

1 plate 3h 2m 0.2 mm 15 g PLA

Phoenix Box

1 plate 1h 28m 0.4 mm 57 g PLA

Phoenix Lid

1 plate 3h 27m 0.2 mm 17 g PLA

Screaming Antilope Box

1 plate 1h 26m 0.4 mm 53 g PLA

Screaming Antilope Lid

1 plate 3h 2m 0.2 mm 15 g PLA

Slenderman Box

1 plate 1h 17m 0.4 mm 43 g PLA

Slenderman Lid

1 plate 2h 18m 0.2 mm 11 g PLA

Smog Singers Box

1 plate 1h 34m 0.4 mm 61 g PLA

Smog Singers Lid

1 plate 3h 49m 0.2 mm 18 g PLA

Spidicules Box

1 plate 1h 23m 0.4 mm 50 g PLA

Spidicules Lid

1 plate 2h 49m 0.2 mm 14 g PLA

Sunstalker Box

1 plate 1h 26m 0.4 mm 55 g PLA

Sunstalker Lid

1 plate 3h 16m 0.2 mm 16 g PLA

Tyrant Box

1 plate 1h 17m 0.4 mm 44 g PLA

Tyrant Lid

1 plate 2h 20m 0.2 mm 12 g PLA

Watcher Box

1 plate 1h 18m 0.4 mm 44 g PLA

Watcher Lid

1 plate 2h 22m 0.2 mm 12 g PLA

White Lion Box

1 plate 1h 22m 0.4 mm 51 g PLA

White Lion Lid

1 plate 3h 2m 0.2 mm 15 g PLA

[D2] Parasite Queen Box

2 plates 2h 54m 0.4 mm 103 g PLA

[D2] Parasite Queen Lid

2 plates 5h 40m 0.2 mm 34 g PLA

[D2] Screaming God Lid

2 plates 7h 46m 0.2 mm 46 g PLA

[D2] Screaming God Box

2 plates 3h 7m 0.4 mm 123 g PLA

[D2] White Lion Box

2 plates 2h 51m 0.4 mm 101 g PLA

[D2] White Lion Lid

2 plates 5h 57m 0.2 mm 33 g PLA

[D2] Screaming Antelope Box

2 plates 2h 58m 0.4 mm 105 g PLA

[D2] Screaming Antelope Lid

2 plates 6h 6m 0.2 mm 36 g PLA

[D2] Hand Box

2 plates 2h 58m 0.4 mm 81 g PLA

[D2] Hand Lid

2 plates 4h 37m 0.2 mm 24 g PLA

[D2] Screaming Nukealope Lid

1 plate 3h 0.2 mm 17 g PLA

[D2] Screaming Nukealop Box

1 plate 1h 30m 0.4 mm 52 g PLA

[D2] Butcher Box

3 plates 3h 56m 0.4 mm 129 g PLA

[D2] Butcher Lid

3 plates 6h 57m 0.2 mm 40 g PLA

As sliced by the designer. Your printer, filament, and settings will change these numbers.

Description

This is a box which is designed to hold all cards belonging to a Monster from the game Kingdom Death: Monster. I have designed

a box for each of the existing ones (core game or expansion). It fits

• AI Cards

• HL (Hit Location) Cards

• MR (Monster Resource) Cards

• IR (Indomitable Resource) Cards

• Hunt Cards

• S Cards

• other special card types which are needed in the Showdown (e.g. Sword Cards for Atnas)

Not included are all other cards which belong to a monster expansion, like Disorders, Fighting Arts, Strange Resources, … . I store them in the corresponding decks. Maybe I decide to change this in the future, it depends what is more convenient for playing.

Design Goal

• sleeved cards should fit

• name on top, because I'm usually looking on my game box from above when searching for cards
• this was always a problem for me with the original card dividers

• node system added (just because there was some room for it, could be useful)

• monster graphic for a nice finish and easier finding

• a “window” at the front because during a campaign I often need to take a quick look on the basic card to check the monster stats and plan my next steps

• should fit into Xelaser Insert (or the insert I use for the Gambler Chest)

• I decided to not use additional dividers inside the box (to separate HL and AI cards for example)
• I do not see a big advantage, usually all cards are needed

• a bigger size would have been needed and a small box size matters for efficient storage

• Red Witches and Bone Eaters are different here, therefore they will get their own model upload

• in general the fit is tight to save space

Print Notes

• the print profiles might exist in two designs. [D1] and [D2]
• if nothing is mentioned it is [D1]

• read the Changelog description for more details

• there are two profiles for each monster
• first profile contains the box

• second profile contains the lid. I printed it with 0.2er nozzle for a nicer result (needed for font and graphics). Especially the graphics have a lot of fine details
• but even with the finest standard settings still some parts of the graphics are not perfect, but in my opinion good enough (see example pictures)

• with D2 I started to add two print plates
• Standard is the one I'm using for my personal storage. It has the meassurements which fit to my collection

• Wide has an increased width of 2mm. This was added because some of you mentioned that the original size does not fit

Additional Notes

• I plan to add additional boxes for future releases and when they become available

• the actual card count for each monster depends on your collection. APG released a lot of Indomitable Survivors with more Indomitable Resources. I possess nearly none of them, so the size might not fit for you, but I think when only 1-2 cards are added it should still be fine

• I don't have the original KDM sleeves, but I hope the difference is not that big, but it could make a difference for you if your sleeves add more width than mine

Changelog

In this section I try to cover all changes and hopefully this will help you to follow my updates.

Different Designs

At the moment I have two designs. For now most of the print profiles are D1. I don't spend the time to rename them all, so if nothing mentioned a print profile belongs to D1. My plan is to update them all and do some improvments, however for most boxes I will wait for Campaigns of Death, because I expect that we get a lot of updates with this expansion.

• D1: original one from my first print run batch
• contains some typos

• some boxes are too tight or too wide
• during design process all cards were distributed on two tables. The meassurement and my file organization on PC was a complete mess, so errors were done

• but still all of them are working for me. I'm using them and accept some minor issues

• the profile and title of the lid was painted in Bambu Slicer
• which probably means the files do not work in other slicers

• D2: I began to rework some errors from the first batch
• the monster profiles and description is now added in CAD software
• which hopefully makes some things easier for me

• which should allow printing with other slicers (not tested by me)

• and hopefully increases the quality a little bit

• [24.05.26] the side wall width was decreased by 0.5mm on each side
• 1.5mm wall strength is stable enough

• it increases the inner length to 1mm which helps remove and insert the cards

• [24.05.26] engraving added to the ground of the box
• helps assigning the correct box

• the alignment of the titles and font was changed, so there is some difference to D1 here
• it should be more consistent, although it was not a big problem before I in my opinion

• CAD software has less options here to configure the font, this might be a reason to change it again in the future

• the Bambu Print Profile was changed from Fine to Standard
• I think a decreased layer size is not required. The 0.2er nozzle is mostly needed because of its finer x/y resolution

• I played around with some settings to decrease the printing duration, but I was not really successful here (still a 3D printing beginner) so I kept the default settings

Changes

• 15.03.2026: [D2] added for White Lion
• increase inner width from 46mm to 49mm

• it was too tight before and now it should also fit the additional cards from Gigalion Vignette

• 15.03.2026: [D2] added for Screaming Antelope
• typo fixed

• increase inner width from 49mm to 54mm

• it was too tight before and now it should also fit the additional cards from Screaming Nukealope Vignette

• 24.05.2026: General change to [D2] profiles
• engraving to box ground added

• slimmer side walls

• each profile contains 2 plates with “Standard” and “Wide” measurements (see printing notes)

• I updated White Lion and Screaming Antelope

• 24.05.2026: [D2] added for Parasite Queen and Screaming God

• 23.06.2026: [D2] added for The Hand
• Node number corrected from 1 to 3

• Box width decreased for 1mm

• added “The” to the caption, because I wanted to align it with the reference card

• general hint: I did not print this for myself at the moment

• 22.07.2026: [D2] added for Butcher
• contains 3 sizes.
• Standard was not changed compared to the original one

• KilleniumWidth inner width is increased from 32mm to 34mm to support additional cards from Killenium Butcher Vignette

• Wide: additional +2mm

• general hint: I did not print this for myself at the moment

• 22.07.2026: [D2] added for Screaming Nukealope
• this was a wish from a user

• it is the same box like Screaming Antelope , just the description and the picture was changed

• because there is no official divider for Screaming Nukealope the profile picture has a different style, it is not perfect but might work

• general hint: I did not print this for myself at the moment, but it was verified by someone else

Feel free to boost this model and/or give it a rating. It keeps me motivated. In case of questions just ask in the comments. I spend a massive amount of time into this project (although it might look simple for you).

kingdom death monster Box storage insert inlay organizer