Ready Set Bet High Roller Chip Trays

I was pretty happy to receive Ready Set Bet High Rollers edition.

I was pretty disappointed that there was no tray for chips.

So I put together some trays that will fit into the original insert, separate chips, and interlock to create chip trays at either end of the table.

There is an odd number of 1s so there are two different trays, 87x1.stl and 90x1.stl.

There is an even number of 5s so you can print two 77x2.stl.

The 25s and 100s are in stored together, so you can print two 64x2.stl.

Four player chips and one set of special chips fits into each of two 84x2.stl.

The first number is size of the stack of chips. If your chips vary in size, you could vary the length of the tray in your slicer.

I had to trim the slot in the original insert to fit the extra length introduced by the trays.

I also printed two deck boxes to suit the cards sleeved in Gamegenic Premium Sleeves. PropBetsDeckx1 and VIPDeckx1.

I had to trim the card slot to fit the deck boxes.

These trays were designed to suit my specific needs.

I printed the files with a stock standard Bambu PS1 and used auto supports.

I hope it works for you.