Too Many Bones: Baddie Chip Dividers

These are divider tokens for separating categories of Baddie chips in their storage containers for the board game Too Many Bones. The dividers were inspired by the design of Fabmaszter. Each chip has the Baddie Type icon and point count on the front. The edges of the 1-pt dividers have one notch, the edges of the 5-pt dividers have five notches, and the 20-pt dividers have no notches.

Edit: Baddie chip dividers for the new Baddie types found in the expansions Undertow and Unbreakable have been posted at:

https://www.printables.com/model/513565-too-many-bones-baddie-chip-dividers-for-undertow-a

Printer Brand:

Creality

Printer:

Ender 5

Rafts:

No

Supports:

No

Resolution:

0.4 mm

Infill:

35%

Filament: eSun PLA+ Black, Purple, Yellow, Fire Engine Red, Blue, Peak Green, Light Blue How I Designed This ===================

The Baddie chip dividers were designed in Fusion 360. The Baddie Type icon images were copied from the downloadable Tyrant Creation Sheet. The images were converted to black and white in Gimp and slightly edited, and then converted to .SVG files using Inkscape. The .SVG files were uploaded into Fusion 360 for extrusion onto the Baddie chip dividers. The resulting .STL files were exported through MeshMixer.

Category: Games