Ticket to Ride - Train

for Ticket to Ride (2004) Lift the Lid

also fits Ticket to Ride: Europe (2005)

also fits Ticket to Ride: Nordic Countries (2007)

ben4096

Miniatures Free

View on MakerWorld 307 1,364 Added Jan 2, 24 | Updated Sep 14, 26 Support ben4096 by Liking and Boosting their model.

Remixed by Ticket to Ride - Coupling Cars

Plan Your Print

About 83 g of filament

Print Profile (2) Single Model - 0.16mm layer, 2 walls, 15% infill 16m 2 g PLA

Single Model - 0.16mm layer, 2 walls, 15% infill

1 plate 16m 2 g PLA

X1 Carbon, P1S, P1P, X1, X1E, A1, A1 mini, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

• Single model on one plate. I recommand to strat with this one before printing loads over night • I had a few try and failed to figure out the best way to print it and I would advice to keep it straight in it's normal position with 4 custom supports (0.4mm) under it on each side. Doing so you can also Iron top surfaces for a very good finish. • I printed it with PLA and also ABS on a textured plate. It weight 1.5g and feel sturdy just like the orginal. • It prints well in 0.16 I tried a 0.08 but I don't think it worth the extra time.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

16m 2 g PLA · 2 g

3x21 Models, 3 colors - 0.16mm layer, 2 walls, 15% infill

1 plate 7h 19m 83 g PLA

X1 Carbon, P1S, P1P, X1, X1E

• 63 models with 3 colors on one plate • I had a few try and failed to figure out the best way to print it and I would advice to keep it straight in it's normal position with 4 custom supports (0.4mm) under it on each side. Doing so you can also Iron top surfaces for a very good finish. • I managed to fill one plate with 3x 21 units, using 3 colors. • It's very important to print per object and not to use AMS per layer, you'll save a considerable amount of time doing so. • I printed it with PLA and also ABS on a textured plate. It weight 1.5g and feel sturdy just like the orginal. • It prints well in 0.16 I tried a 0.08 but I don't think it worth the extra time.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

7h 19m 83 g PLA · 27 g PLA · 28 g PLA · 28 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

Don't ask me about the game I made this one for a friend :)
I printed 60 of then in 4 differents colors and he was happy with the results so I figure I could share it.

I built the model from scratch with Houdini and it's very close to the original, exact same size but a few minor adjustements to help the print (mostly thicker walls and very slighty exagerated details).

train ticket to ride