Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Hot Streak Insert
Inserts
Free
Plan Your Print
3 makers
Sign in
to track this print from Want to Printed.
✓ Fits sleeved cards
About 235 g of filament
From the designer's print profile
Print Profile 6h 39m 235 g PLA
What it takes
2 plates
6h 39m
235 g PLA
A1, H2D Pro, H2D, H2S, X2D, P1P, X1 Carbon, A2L, P1S, X1, H2C, P2S, X1E
Bambu defaults, should print great as-is
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1
4h 55m
183 g
PLA · 183 g
Plate 2
1h 43m
52 g
PLA · 52 g
Designer's Description
An insert for Hot Streak, the board game!
WARNING: Some users are reporting that the newest printing of the game has a smaller top tray, which won't fit this insert! This is designed to fit in a tray that's about 42mm deep, please check your copy before you print!
Boost Me If you like my work, a free boost is the best way to support me!
Features:
- Fits sleeved cards, even with thicker matte sleeves
- Removable money tray that makes setup faster and makes it easy to grab bills
- Plenty of room for fingers to get to the holes to lift the tray out completely to get to the minis
- Gaps around components are large and extend underneath, making it easy to pull out components
Note that the base tray has been sliced to more easily fit on smaller printers. After printing, the sides can be glued together if desired. Or, if you have a big enough printer, they can be merged and printed as a single unit.
My personal print settings:
- 0.4mm nozzle
- 0.20mm layer height for base, 0.08mm layer height for money tray (to get less stair-stepping, but it's not necessary)
- Lightning infill
- 0 bottom layers for base (since it will never need to be removed from the box)
However, just about any settings should work fine here. Nothing tricky, no supports, etc.
