HeroQuest Dashboard – Card Holder & Score Tracker

Thank you for the brilliant original design Bauzival ! I remixed this to address the issue with the dials being too tight and to allow for dual-color printing without an AMS. • I broke the original model down into components to allow full customization. Feel free to tinker around and modify as desired! • I increased the baseplate height so that the icons are at the same print level as the numbers on the dial, to allow dual-color printing without AMS. Pauses for filament change are at level 16 & 19. • I re-sized the knobs for the dials (the original print was too tight for me and the dials were impossible to turn). I also added a cutout in the middle of the knobs to allow flexibility for easier turning of the dials. • Plate 2 is a miniature test print of both knob and dial sizes, so you can check that the dials will snap on and rotate smoothly with whatever filament you use. Any tweaks needed can then be made on the main plate before the full print. • I split the baseplate into layers to strengthen the top (100%) infill for better durability to avoid knobs snapping off with turning, while allowing the bottom to have lower infill to conserve filament. • I changed the font of the “GOLD” text. I left this as a separate part in the file so the font, so feel free to change it to any font you please! • I added ironing to all of the icons on the baseplate for a better finish. I think that's everything. Please enjoy!