LayerUp Stats

Add Jul 22, 26 Edit Jul 31, 26 Sync Sep 13, 26

3 follow PandaruExpress

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Stackable Game Bits Funnel Tray - Remix

Storage & Containers Free

View on MakerWorld 424 1,664 Added May 16, 24 | Updated Sep 13, 26 Support PandaruExpress by Liking and Boosting their model.

Also Found On Printables 312 Thingiverse 3,086

Remix View the original model (Thingiverse)

Plan Your Print

About 17 g of filament From the designer's print profile

Print Profile (6) 0.2mm layer, 3 walls, 30% infill 24m 17 g PLA

0.2mm layer, 3 walls, 30% infill

1 plate 24m 17 g PLA

P1S, P1P, X1, X1 Carbon, X1E, A1, A1 mini, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

24m 17 g PLA · 17 g

0.2mm layer, 3 walls, 30% infill - AMS Colored Base

1 plate 1h 22m 69 g PLA

P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Same as standard but with painted settings so you can have a different colored base. Used with AMS

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

1h 22m 69 g PLA · 35 g PLA · 34 g

0.2mm layer, 3 walls, 30% infill // x4

1 plate 1h 48m 67 g PLA

A1, H2D, X1 Carbon, X1E, X1, P1P, P1S, H2D Pro, H2S, P2S, H2C, X2D, A2L

Same as standard but there is 4 of them on one plate.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

1h 48m 67 g PLA · 67 g

0.2mm layer, 3 walls, 25% infill

1 plate 38m 24 g PETG

A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Made for PETG Translucent, didn't work with the orginale print profile this worked voor PETG translucent :).

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

38m 24 g PETG · 24 g

Slightly taller with Fuzzy Skin

2 plates 5h 15m 86 g PLA

Raised walls slightly and added fuzzy skin. Utilized same 30% grid infill for base. Multi color with AMS

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1 · 2 Trays

3h 28m 57 g PLA · 14 g PLA · 29 g PLA · 14 g

Plate 2 · 1 Tray

1h 47m 29 g PLA · 15 g PLA · 14 g

0.2mm layer, 3 walls, 30% infill, Contour Fuzzy Skin

1 plate 27m 18 g PLA

X2D, H2D, H2C, P1S, H2S, A1, P1P, A2L, X1 Carbon, P2S, A1 mini, X1, H2D Pro, X1E

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

27m 18 g PLA · 18 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

This is a remix of the excellent bit trays by swholmstead .I didn't do anything except extend and taper the base to cut down on print time and filament use. They still stack exactly the same way as the original but because of the scaling issues when importing, they're slightly smaller than the original "large" trays.

To match photo:

Print with top layer and bottom layer set to 0, wall thickness 1.2mm. Grid infill at 30% (Cura: Zigzag infill at 20%)

About a 25% savings in print time and a 20% savings in filament.

Want the base to be solid?

You can reslice to add top and bottom layers back (Bambu: Under strength tab, top and bottom shell layers)

Want a different pattern on the bottom?

Try reslicing but select a different infill pattern (Bambu: Under strength tab, sparse infill pattern). Note that you need to view the sliced preview to make sure that the infill will work, some of the infills are disconnected from each other. You want a grid or other highly linked pattern.

Looking for some options with lids? Check out my other models:

Single tray with lid: https://makerworld.com/en/models/466060

Double or triple tray with lid: https://makerworld.com/en/models/777117

Stackable trays with lid: https://makerworld.com/en/models/822467