LayerUp Stats 21

Add Aug 16, 26 Sync Aug 16, 26

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Ada's Dream Deluxe Edition Board Game Insert

for Ada's Dream (2025) Layer by Layer

Sortirus

Inserts Free

View on MakerWorld 13 62 Added Feb 14, 26 | Updated Aug 14, 26 Support Sortirus by Liking and Boosting their model.

Also Found On Printables 7

Plan Your Print

✓ Fits sleeved cards

✓ Fits premium sleeves Thick 100+ micron sleeves, not just standard ones

✓ Stores vertically Stands on its side; contents stay put

About 415 g of filament From the designer's print profile

Print Profile (2) 0.24mm layer, 2 walls, 12% infill 13h 4m 415 g PETG

0.24mm layer, 2 walls, 12% infill

4 plates 13h 4m 415 g PETG

P1S, H2C, A1, X1 Carbon, X1E, H2D Pro, H2D, H2S, X1, P2S, P1P, X2D, A2L

Print this if you have metal coins.

Plate Details (4)

0.4 mm nozzle, all plates

Plate 1

5h 28m 161 g PETG · 161 g

Plate 2

3h 26m 122 g PETG · 122 g

Plate 3

1h 16m 27 g PETG · 27 g

Plate 4

2h 53m 105 g PETG · 105 g

0.24mm layer, 2 walls, 12% infill

4 plates 13h 9m 413 g PETG

P1S, H2C, A1, X1 Carbon, X1E, H2D Pro, H2D, H2S, X1, P2S, P1P, X2D, A2L

If you don't have metal coins, print this.

Plate Details (4)

0.4 mm nozzle, all plates

Plate 1

5h 34m 159 g PETG · 159 g

Plate 2

3h 26m 122 g PETG · 122 g

Plate 3

1h 16m 27 g PETG · 27 g

Plate 4

2h 53m 105 g PETG · 105 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

If you want, you can help me with designing inserts by donating here:

Hello,

for those that don't know my ‘insert philosophy’ - I am creating modular inserts that are focused on reducing setup and space on table, filament consumption is not my highest priority, but of course I'm trying to save some material where I can.

Important Notes:

If you want to acquire commercial licence for this model, visit my club page on printables,
Clearence for holder covers is very small - 0.2mm horizontal. Please print the smallest holder and cover for it to check if it fits, if not you may need to calibrate printer or enlarge cover a bit (adding 0.2-0.4mm to the width in the slicer should be enough),
card holders - they're very tight, so in order to put all cards you may need to squeeze them in, just put most of the cards in and when you have trouble adding more - one side of the holder (front one) is shorter, so you can put cards on top of the cards that are in the holder, squeeze them a little and then you will be able to fit all cards.

Supports:

vertical storage ,
deluxe edition,
metal coins,
sleeves - this is mainly design for 70 microns sleeves (I use Sloyca). Card holders are pretty tight, so you won't be able to squezze thicker sleeves without adjustments.

This insert features:

player components holder - everything that player needs during setup,
setup components holder - for everything needed during setup,
books holder - take it out and put it on the board,
cards holders - take it out and put on the table or board,
program addition gears holder - take it out and put it on the board,
resources coins multiplication gears holder - take it out and put it on the board.

Requirements:

about 414g filament needed, (depends on your settings, I printed with 12% gyroid infill, 2 walls, 4 top and 3 bottom layers, 0.42 line width),
at least 200mm x 80mm print bed (maybe lower if you rotate the holder).

Instructions:

Supports - no supports required.

every file ended with xX (for example x16) - print X times (in given example - 16 times),
every file ended with _VARIANT - it's another variant for the model with the same name but without __ ending, only one variant is required to be printed,
refer to pictures how to organize the box.

What future holds: