Lord of The Rings: Duel Insert / Organizer

for Lord of the Rings: The Duel (2002) Layer by Layer

Inserts Free

View on MakerWorld 42 131 Added Jan 17, 25 | Updated Aug 11, 26 Support Sortirus by Liking and Boosting their model.

Also Found On Printables 36

Plan Your Print

✓ Fits sleeved cards

✓ Fits premium sleeves Thick 100+ micron sleeves, not just standard ones

✓ Stores vertically Stands on its side; contents stay put

About 259 g of filament From the designer's print profile

Print Profile (2) 0.24mm layer, 2 walls, 12% infill 8h 2m 288 g PETG

0.24mm layer, 2 walls, 12% infill

2 plates 8h 2m 288 g PETG

P1S, H2C, X1, P1P, H2D Pro, X1E, A1, H2S, X1 Carbon, H2D, P2S, X2D, A2L

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1

5h 9m 196 g PETG · 196 g

Plate 2

2h 53m 92 g PETG · 92 g

0.2mm layer, 2 walls, 15% infill

3 plates 6h 3m 259 g PLA

P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Plate Details (3)

0.4 mm nozzle, all plates

Plate 1 · Player_set_x2

1h 16m 43 g PLA · 43 g

Plate 2 · Box_insert_cover

38m 10 g PLA · 10 g

Plate 3 · Box_insert

4h 9m 206 g PLA · 206 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

If you want, you can help me with designing inserts by donating here:

or joining my club here:
https://www.printables.com/@Sortirus_659392#join.@Sortirus_659392.1094

Hello,

for those that don't know my ‘insert philosophy’ - I am creating modular inserts that are focused on reducing setup and space on table, filament consumption is not my highest priority, but of course I'm trying to save some material where I can.

Important Notes:

My prints take a lot of time to print. Why? First of all, to save filament, electricity price is much lower than filament price (at least in my country). Second of all - total weight, if it's to high it can damage the box and our spines :D + weight also influence vertical storage, box can open by itself,
Clearence for holder covers is very small - 0.2mm horizontal, make sure that you have calibrated printer. In worst case - you could add like 0.2-0.4mm to cover width in the slicer.

Supports:

vertical storage ,
sleeves - for sure 70 microns, I think 100 microns can also fit, but I don't have them, so I can't check. There is plenty space though,
promo tiles - additionally to 2 promos - there is space for at least 2 more.

This insert features:

Player_Components_Holder_x2 - for player components (wooden pieces),
Holder - for everything else. Built-in storage for coins (with cover) and alliance tokens. Best to take the whole holder out and put it on the table.

Requirements: