Ada´s Dream Insert (with Expansions)

Update 2.2.
Made the Yellow Gear holder a mm wider for better fitting. Since its a big wider now, i made a new placeholder too.

Update 2.1:
I finally got the game back! I've added a Storage Guide (PDF download) to help you pack.

Update: Corrected the Setup Tray where the yellow Visitor Meeple was protruding 1.5 mm. Bonus: I also created a soundtrack for the game: https://www.youtube.com/watch?v=MWWL-eC5CNM

Update to the Update:) Added a slightly bigger Assignement Card Tray. It fits sleeved cards up to 47,5 x 71,5 mm. I added the parts to the Insert upgrade to 2.0 3mf file too.

Update 2.0. Thank you so much for all the comments. I've adjusted a few parts because the print was too wide for some. The setup and the dice tray have been trimmed. The bookshelf for the notes is also slightly smaller, as is the one for the purple gears.

This should make everything fit snugly in the box. Unfortunately, I can't test it myself since I don't currently have the game. So please feel free to leave a comment.

The new files are labeled V2. I've also uploaded a Bambufile containing only the new parts. (Insert Upgrade to 2.0)
Printing the update unfortunately requires an additional 260g of filament.

Update 1.4. Corrected the Purge tower on Plate 2 and added a optional placeholder for the yellow Cog Tray, so it can be stored horizontally and is not so tight.
Update 1.3. Optimized the Base Plate for better printing results.
Update 1.2. Added the single Yellow Cog Tray file, wich i forgot. (The Bambu pre-colored File was complete)
Update 1.1. Corrected a Typo (Resources)

I've created an insert for Ada's Dream. I spent over a week on it, which is much longer than I originally expected. But after endless testing, I'm very happy with the result.

The insert is designed for quick assembly, and most of the trays can be easily placed on the playing field. Their design is also thematically coordinated.

As a little extra, I created a plate. The Solo materials are stored under this plate, and the plate indicates where each tray goes. Because we all know how it is. Removing the insert is never a problem, but putting everything back in at the end is always annoying :D

Oh and yes! It fits sleeved Cards up to 68,5x92,5mm
I used Gamegenic Sleeves Standard Prime.

Note: Some of the designs on the lids are only 0.1 mm apart. Not every slicer can recognize this for coloring.

With the Bambulab, it's no problem. There's also a pre-colored file included for Bambu printers.

Longest printed Part is 161mm.

The file also already has the fuzzy skin preset for the corresponding files.

There is a small Lid lift of 2 mm, if you use the Exhibition Expansion. If you dont want this, you can replace the Baseplate and put the Exhibition board there.

Please feel free to contact me, if you have questions or issues.