Quests Over Coffee Custom Insert

You need to print one insert (with or without the baffles) and a lid. If you use 3 wall loops you'll avoid the loud, high vibration, tiny fill the printer tries to do in a wall, if you like. I've also shaved the base down to 0.4mm (2 layers) to give it a bit more room for the case lid to close securely, with the instuctions inside. Make sure your slicer doesn't override the thin base layers if you need this extra space.

Note that it is a tight fit (height-wise). The lid closes with the rule book binding away from the case clips. Your print tolerances might be slightly different to mine, and there is a fraction of a mm in it, so if you can't close yours you can slide the rules behind the case sleeve as a backup.

Let me know what you think and if you have any suggested improvements, or need something similar for another game.

All my Boardgame Bits, models anf files are on my Patreon page, https://www.patreon.com/BoardgameBits.

UPDATE: A cutout has been added to make it easier to grab and remove the lid. There are now 2 lid options, one with the hollow lettering and one with raised lettering (try a black lid with white lettering?).