Senjutsu: Battle for Japan - Big Box Sleeved

If you do not have a 3D printer and wish to purchase this insert, I have authorized PrintablesByCaren to sell copies of this. You can find a shop link below. https://www.etsy.com/listing/1716865487/senjutsu-battle-for-japan-big-box-insert?click_key=090462d6c960c354b81a9056d5cc4af029508017%3A1716865487&click_sum=cee9e1fb&ref=shop_home_active_5&sts=1

Edit V1.1: Corrected 44 text to 41 on Card Storage Box File.

Edit V1.2: I posted a resized remix to Ensi's Torii Gate and added a photo to this listing. It will fit in the existing Torii Gate Slot of this insert. File Here:
https://www.printables.com/model/989306-senjutsu-battle-for-japan-slot-fitting-torii-gate

This is my insert for Senjutsu Battle for Japan - Big Box KS edition (all in sleeved).

It is designed to fit the sleeves that shipped with the all-in edition from the Kickstarter. It also allows for the cherry blossom tree and torii gate to remain fully assembled and undisturbed in the box so it will cut down and wear and tear.

This also sorts out the content by expansion with unique etchings, Kanji, Cherry blossom pedals etc. for a high-end presentation. The models shown in the photos were printed on a Bamboo Labs X1C using Sunlu White, and Bamboo Labs Matte Black and Red for the lettering. If you do not have the ability to color swap you can just print single color - it won't look as cool but it is still serviceable.

I felt that the insert that shipped with the Big Box Edition did not have sufficient card organization storage, and the top tray especially needed to be cut in order to keep the edges of the sleeves from bending. This insert also keeps things organized by expansion so you can see at a glance everything you have for the game in an organized fashion. Just the way I like it.

This will take up a lot of filament (nearly 2 Kilos) and possibly up to 48 hours of printing time if you do multicolor. it is no joke - but it's a one and done deal.

For anyone doing multicolor, the text on the card boxes is 0.50mm high, and on the minis trays it is 2mm high. We found it printed best on the 2mm high text to only color the tops of the text. Also you may need to enable “detect thin walls” in your slicer settings to make sure the text shows up. PREVIEW YOUR SLICE before hitting print so you aren't disappointed with scrambled text.

Quick snynopsis of layout. Bottom layer is all the card decks - see picture for arrangement.

The card decks are designed to be able to store each character by their signature deck. Yes - I am aware that the game is short 4 cards total to be able to do this - What I personally did, was I took the reference cards in their sleeves - then made copies of the missing signature cards on simple printer paper, then cut it out neatly and slid into the reference card sleeve (like a sandwich). I personally cannot tell which is which - it looks and feels the same as a real card.

The “signature” ability slot on the card storage tray is for all the leftover signature cards that are not part of the official signature deck. Then ability slots 1-3 will be full and ability slot 4 is clear in case you have some card runover after modifying decks.

The corner of the bottom layer has 3 stacking boxes. I personally keep the downgraded bamboo and shrine along with the clear plastic standee bases in one. The downgraded focus tokens and other player components in another, then all the upgraded metal components in the third one.

Top layer (see picture) is the Cherry Blossom box, Core tray, and all the expansion trays.

The pink box is a coin pouch for the metal coin which does fit in a slot on the top layer.

When all is set correctly the top layer is flush and flat and has plenty of room for the boards, neoprene, scenario books and game manual. You will have no lid lift.

As of now - this insert is not vertical storage friendly. I will probably be working on lids for the core box tray so keep an eye out for those in the near future. I do not personally store my games vertically (gross) but I know others do and I want to provide that option.

This is for personal use only - no sales, online store offerings etc. I designed this insert and have it available for free for my fellow board gamer/3d printing bros.

If you have Bantam West - check out my other insert. I will be doing more. Enjoy!