Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Coffee Rush + Piece of Cake INSERT

Inserts Free
Plan Your Print
Fits sleeved cards
No lid lift The box opens and closes without lifting the insert out
Stores vertically Stands on its side; contents stay put
About 392 g of filament From the designer's print profile
Print Profile (3) Single Color - custom settings 11h 50m 392 g PLA
Single Color - custom settings
5 plates 11h 50m 392 g PLA
A1, P1P, H2D, P2S, X1 Carbon, P1S, X1, X1E, H2S, H2D Pro, H2C, X2D, A2L
Plate Details (5)
0.4 mm nozzle, all plates
Plate 1 · CardHolder and PlayerBoxes
5h 13m 184 g PLA · 184 g
Plate 2 · Ingredients and Cake Trays
2h 54m 126 g PLA · 126 g
Plate 3 · CoffeeTrays and SpacerA
1h 14m 36 g PLA · 36 g
Plate 4 · SpacerB
1h 56m 39 g PLA · 39 g
Plate 5 · IngredientTray Cover
33m 7 g PLA · 7 g
Multicolor Manual - custom settings
10 plates 13h 11m 400 g PLA
A1, P1P, H2D, P2S, X1 Carbon, P1S, X1, X1E, H2S, H2D Pro, H2C, X2D, A2L
Plate Details (10)
0.4 mm nozzle, all plates
Plate 1 · PlayerBox1
1h 9m 35 g PLA · 35 g
Plate 2 · PlayerBox2
1h 9m 35 g PLA · 35 g
Plate 3 · PlayerBox3
1h 9m 35 g PLA · 35 g
Plate 4 · PlayerBox4
1h 9m 35 g PLA · 35 g
Plate 5 · IngredientsTray
1h 29m 60 g PLA · 60 g
Plate 6 · CakeTray
1h 33m 67 g PLA · 67 g
Plate 7 · CoffeeTrays
41m 23 g PLA · 23 g
Plate 8 · SpacerA and CardHolder
2h 24m 64 g PLA · 64 g
Plate 9 · SpacerB
1h 57m 39 g PLA · 39 g
Plate 10 · IngredientTray Cover
33m 7 g PLA · 7 g
Multicolor AMS - custom settings
10 plates 14h 3m 422 g PLA
A1, H2S, P2S, H2D Pro, H2D, H2C, X2D, A2L
Plate Details (10)
0.4 mm nozzle, all plates
Plate 1 · PlayerBox1
1h 19m 39 g PLA · 4 g PLA · 35 g
Plate 2 · PlayerBox2
1h 13m 37 g PLA · 20 g PLA · 17 g
Plate 3 · PlayerBox3
1h 20m 40 g PLA · 4 g PLA · 20 g PLA · 16 g
Plate 4 · PlayerBox4
1h 20m 40 g PLA · 20 g PLA · 16 g PLA · 4 g
Plate 5 · IngredientsTray
1h 35m 62 g PLA · 32 g PLA · 23 g PLA · 7 g
Plate 6 · CakeTray
1h 41m 70 g PLA · 42 g PLA · 28 g
Plate 7 · CoffeeTrays
41m 23 g PLA · 23 g
Plate 8 · SpacerA and CardHolder
2h 24m 64 g PLA · 64 g
Plate 9 · SpacerB
1h 56m 39 g PLA · 39 g
Plate 10 · IngredientTray Cover
34m 8 g PLA · 8 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description

This insert lets you organize the boardgame Coffee Rush and its expansion Piece of Cake in the base game box, with no lid lift, making the setup faster and easier.

Components:

  • Player Box: made to hold the cups, the meeples and the upgrade tiles. Give one to each player and forget about it.
  • Card holder: fits sleeved cards. Holds base game, expansion and promo cards. Has a pocket for Starting Player Token and a side holder for removed cards. It's also useful during game play ( see explanation below ).
  • Ingredients Tray: holds all ingredients conveniently in a single piece and also keeps your Rush Tokens handy. It also includes a cover to protect against spillage if needed (vertical storage), or you could also put the cakes on top and ingredients on bottom and there is no spillage of components.
  • Cake Tray: holds all the cakes from the Piece of Cake expansion.
  • Extra Coffee Trays: an extra piece to put your cups while preparing your orders. Looks cute when playing, helps locate your cups faster haha.
  • Spacers A-B: need them to keep everything leveled in the box. Print and use them as follows:
  • If you want to store both sets of player boards in the box, you only need 1 spacer (labeled spacer A ). Print this spacer once and set it under the Cake Tray. - This is the configuration I prefer and use, as shown in the pics.-
  • On the other hand, if you don't intend to keep both sets of player boards , you will need 3 spacers to keep all leveled in the box. Print Spacer A one time and set it as described in option 1, and then print Spacer B two times for this setup and place them under the Player Boxes. (They now replace the player boards that go here).

So to keep it simple:

8 player boards in the box? Print only spacer A one time.

4 player boards in the box? Print spacer A one time and Spacer B two times.

The card holder keeps all tidy, but also works during gameplay!

When using the expansion or promo cards, you're always instructed to remove a certain number of cards from the deck, and then add the expansion/promo cards. There is a side holder for these removed cards . This way you can use the card holder as a deck pile and a discard pile during the game.

cake coffee pieceofcake coffeerush
Coffee Rush: Piece of Cake box art Coffee Rush: Piece of Cake 2024 Layer by Layer
Cover Colors

Main colors from the cover art. Find matching filament, or tap swatches to narrow.

Matching filament

Submitted via BGG Geeklist
Nov 13, 2025 by veka92

and Makerworld .