Dice Command 'Armoured Division' Tanks-Colorized

for Dice Command (2021) Layer by Layer

B1g Dav3

Free

View on MakerWorld 3 4 Added Aug 25, 25 | Updated Jul 25, 26 Support B1g Dav3 by Liking and Boosting their model.

Plan Your Print

About 156 g of filament From the designer's print profile

Print Profile (2) 0.12mm layer, 2 walls, 15% infill 13h 2m 156 g PLA

0.12mm layer, 2 walls, 15% infill

1 plate 13h 2m 156 g PLA

X1 Carbon, X1E, P1S, A1 mini, H2D, H2D Pro, P1P, A1, X1, H2S, P2S, H2C, X2D, A2L

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

13h 2m 156 g PLA · 21 g PLA · 26 g PLA · 22 g PLA · 87 g

Box for Tanks - 0.2mm layer, 2 walls, 12% infill

3 plates 4h 2m 151 g PLA

X1 Carbon, X1, H2D, P1P, X1E, H2D Pro, A1 mini, P1S, A1, H2S, P2S, H2C, X2D, A2L

Plate Details (3)

0.4 mm nozzle, all plates

Plate 1 · 1x - Base & Latches

1h 45m 68 g PLA · 68 g

Plate 2 · 1x - PRINT Just one Lid - this has name

1h 17m 43 g PLA · 3 g PLA · 40 g

Plate 3 · 1x - PRINT Just one Lid - this is clear

1h 40 g PLA · 40 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

This is the freely available STL that came with the Kick-starter Edition (you obtain it and the license by signing up for the email list on their website: https://www.dicecommand.com/) of ‘Dice Command’ in which these hold the die for the ‘Armoured Divisions'. You will need a total of 8 (which are all on a single plate).

I modified the original in these ways:

Colorized the print **NOTE: This is a 4 color print - Olive Drab Green, Gold/Yellow, Silver, & Black…adjust if/as needed
added material at the bottom to avoid supports (although the print still needs a single support for the turret and possibly the back tracks)
Added a hole in the middle to aid in easier getting the die out/in

Be careful removing supports….what I did was to clamp/pull-down in the middle to remove bottom part…then turret part could easily twist off in your finger pressure (see pictures)

UPDATE: 2025-08-26 - I've added a themed container/box sized properly to hold these extra Armoured Divisions for the game (based on the great work of @RDesigns - you'll need to view their print info for assembly instructions . It includes two different lids (one with a name & one without) - you'll only need to print one of them. Enjoy!

Boost Me Please consider Boost(ing) (its FREE and is really encouraging!). Thanks in advance :^D

kickstarter colorized war game dice command