Spirit Island Organizer (Expansions + Promos)

This organizer fits the base game and both expansions into one box with minimal lid lift (around 4 mm with rule books). This tight fit also ensures that the components stay in their boxes when you transport the game, even for example when stored vertically in a bike bag.

This inlay fits:

▸ Base game

▸ Branch & Claw (minus the invader board)

▸ Jagged Earth

▸ Promo 1

▸ Promo 2 (should fit, but I don't own it yet)

Since both expansions contain all cardboard tokens (disease, strife, etc) you will have way to many of them. So in order to fit all games into one box, you will have to leave a few of the excess tokens out.

A full set weighs about 350 grams of PLA. The largest parts are 215 x 132 mm, so you can print it on a reasonably sized printer.

The walls are designed for 3 perimeters with a 0.4 mm nozzle. Depending on your slicer you may have to enable "Detect thin walls" or similar to print this correctly. You can customize the scad file to easily adjust the wall width and the floor thickness and enable/disable symbols. You need at least OpenSCAD Version 2019.05, so the online customizer does not work, sadly.

Printer Brand:

Anet

Printer:

A8

Resolution:

0.2

Infill:

10%

Filament: Patona PLA white