Mythwind Insert with Expansions (Pre F&F - See V2 for most recent)

**I should not have to add this to my posting.... DO NOT SELL MY WORK. My work is available for NON-COMMERCIAL USE ONLY. I make and upload inserts for free to give back to a community that has given so much to me. If you steal my stuff, I will make sure your site is taken down and you are banned.**

UPDATE 1/25/2026: After having been invited to playtest the new Shepherd and Herbalist expansions coming out, I halted progress briefly on this project. With the help of the OOS designers (thank you, Nathan and Brendan!), I've reconfigured the entire insert to (hopefully) be able to house the future Shepherd and Herbalist expansions, along with the F&F expansion. Since the update to the insert was pretty much tossing my whole work out the window and creating a new insert, [I also created a new Thing, link here](https://www.thingiverse.com/thing:7281541). TO BE CLEAR: The insert in THIS file that you are reading is COMPLETELY SEPARATE AND UNNECESSARY if you decide to use the newest insert I've created. Do not print both.

UPDATE 5/8/2025: I'm currently working on updating this insert to fit in the new expansion offerings from Open Owl Studios. Among changes I'd like to make is ATTEMPTING to get all supplies, boards, and tokens into just two of the three boxes max. My ultimate goal is to get them into just the base, but I haven't been very successful in that level of reorganization yet. Thank you for being patient with me! This could take a minute, because I want to do it right and make it accessible to all variants of contents users may have. For now, I've made it a Work in Progress to flag it as being updated.

I recently acquired Mythwind and am really loving it, but I wasn't loving having to drag out and dig through two separate boxes to get at all of the extra pieces in the "main" inserts in each box every time I wanted to play solo. So I combined the boxes and created an insert to hold everything leftover in both boxes.

FAQ:
- Do I have to cut the boxes? Nope, but you might experience a little lid lift from the bottom panels being intact.
- Do I have to glue or tape them together? Nope, but I find it's better for stability. If you're not cutting out the bottom panel, you might have better luck with not adhering them and simply nesting them together.
- Then why did you...? I'm not afraid to cut into boxes, especially in games I know I'm going to keep for a very long time. Because the main box is so tight for space anyway, I knew every mm was going to count.
- What's that empty card spot for? That's for your discard stack - now you have a place to put all the things you're pulling out of the game as you play!
- There's a lot of wasted/extra space...? Yep! With the reprint coming out, I made this as modular as possible so that I could add in designated spaces for the new content. Also, there's sprite minis out there!

To combine the boxes:
- Cut out both bottom panels of the bottom boxes with a VERY SHARP craft knife.
- Insert the resulting surrounds into the opposite box tops so that the bottom of Expanded Horizons is in the top of the main box, and the bottom of the main box is in the Expanded Horizons lid.
- Marry the two to check for fit. You want NO gap between the two lids.
- Trim away excess paper if necessary around previous cuts.
- Adhere the surrounds to the lids and you now have a bigger box!

To print this insert:

Print one of everything, except the boxes that hold the event cards, adventure cards, and an extra slot for discards. You'll need two of those. I've marked the file name so it's obvious.