Ezra and Nehemiah Insert

English:

This is an insert for the board game Ezra and Nehemiah by Graphill Games.

The game stores the entire game content including promo tiles, sleeved cards and the premium coins.

In addition, the inlay is designed so that there is a separate player tray for each player, which stores the entire player content and thus guarantees a quick game setup.

The entire box closes flush without lid lift and is suitable for both vertical and horizontal storage.

Remark:

If the premium coins are used instead of the cardboard coins, the 10 puches may need to be stored in the scoll tiles tray, as the coin tray may run out of space.

Printing instructions:

Each of the uploaded STL files must be printed at least once. Only the bread_and_coins_tray_x2.stl must be printed twice (as indicated by the x2).

The trays are already exported in the correct orientation, so NO supports are necessary for the entire print.

Therefore, please print the player_trays vertically (as they are aligned in the STL).

If you have any problems, please contact me, I will be happy to help!

---

German:

This is an insert for the board game Ezra and Nehemiah by Graphill Games.

The game stores the entire game content including promo tiles, sleeved cards and the premium coins.

In addition, the inlay is designed so that there is a separate player tray for each player, which stores the entire player content and thus guarantees a quick game setup.

The entire box closes flush without lid lift and is suitable for both vertical and horizontal storage.

Note:

If the premium coins are used instead of the cardboard coins, the 10 puches may have to be stored in the scoll tiles tray, as the coin tray may run out of space.

Printing instructions:

Each of the uploaded STL files must be printed at least once. Only the bread_and_coins_tray_x2.stl must be printed twice (as indicated by the x2).

The trays are already exported in the correct orientation, so NO supports are necessary for the entire print.

Therefore, please print the player_trays vertically (as they are aligned in the STL).

If there are any problems, please contact me, I will be happy to help!